Specification

!
!
A Division of Reliance Worldwide Corporation
!
2400 7th Avenue S.W · Cullman · Alabama 35055 · USA · www.cashacme.com
US Contact: 1-877-700-4242 · [e-mail] · Canadian Contact: 1-888-820-0120 · [e-mail]
Specifications & Sales Sheet • Issue Date March 2014 • Last Revision March 2016
!
Heatguard
®
110-D Series–Lead Free
!
TYPICAL INSTALLATION
Domestic hot water distribution. To control water temperature at the source of heat (water
heater) or point-of-use (sinks, lavatories, or bath tubs) to provide a safe distribution
temperature.
!
!
!
Heatguard® 110-D LF
ASSE 1017, ASSE 1069, ASSE 1070, CSA B125.3
Tempered Water
120°F (49°C)
Dishwasher
Hot
Water
Water Heater
Set to
140°F (60°C)
Cold
Water
Supply
!
!
SPECIFICATION DATA
Performance:
Outlet temperature range 85 – 130°F (29 – 54°C)
Factory set and locked 120°F (49°C)
Temp. hot supply 120 – 180°F (48.9 – 82.2°C)
Temp. cold supply 39 – 80°F (3.9 – 26.7°C)
Maximum pressure 230 psi (1600 kPa)
Flow rate, minimum 1 gpm (3.8 l/min)
Flow rate, maximum 20 gpm (76 l/min)
Materials:
Body Bronze
Seals EPDM
Springs Stainless Steel
Internal cap Brass
Piston Engineered Polymer
Guide tube Noryl GFN2
!
!
AVAILABLE CONNECTIONS
Sweat 1/2", 3/4" and 1"
Barb (PEX) 1/2" and 3/4"
Threaded (NPT) 1/2" and 3/4"
CPVC 1/2" and 3/4"
SharkBite 1/2" and 3/4"
!
CERTIFICATIONS
The Cash Acme Heatguard
®
110-D LF is certified to ASSE 1017, ASSE
1069, ASSE 1070, CSA B125.3, and NSF 372 and listed by IAPMO, CSA,
and ASSE for use in accordance with U.S and Canadian plumbing codes.
!
!
!
!
!
!
!
Note: Flow rate determined on a
Heatguard
®
110-D LF with ½” sweat fittings
!
!
TRIPLE LISTED!
ASSE 1017
ASSE 1069
ASSE 1070
!