Installation Guide

4
PEX TUBE SUPPORT LINER REMOVAL
The tube liner is not necessary with CPVC or Copper tubing, and may be removed based on
preference or local codes. The tube liner can be easily removed by pulling it past the o-ring, then
with the aid of the SharkBite
®
disconnect clip or disconnect tongs (both sold separately), the Tube
Support Liner can drop out of the tting as it can move freely past the grab ring. Needle nosed pliers
may be used to pull the Tube Support Liner out.
Gently work the Tube
Support Liner past the o-ring
Stop once the Tube Support
Liner has been pulled past
the o-ring, the Tube Support
Liner cannot be pulled out any
further due to the grab ring.