Operation Manual, Quick Start Guide

BEFORE USING THE MACHINE
17
LOADING PAPER
NAMES AND LOCATIONS OF TRAYS
The names of the trays are as follows.
Setting orientation of the print side
The setting orientation varies for the print side of paper, depending on the tray used. For "Letter Head" and
"Pre-Printed", set the paper in the reverse orientation.
Place with the print side facing the direction indicated below.
Tray In normal status With letter head or pre-printed paper set
Trays 1 - 4 Facing up Facing down
Bypass tray Facing down Facing up
(5)
(1)
(2)
(3)
(4)
(1) Tray 1
(2) Tray 2 (when a 500-sheet paper feed tray is installed)
(3) Tray 3 (when a 500-sheet paper feed tray and a stand/2x500
sheet paper drawer are installed)
(4) Tray 4 (when a 500-sheet paper feed tray and a stand/2x500
sheet paper drawer are installed)
(5) Bypass tray