Operation Manual, User's Manual

1-128
BEFORE USING THE MACHINE►HOW TO PLACE THE ORIGINAL
Allowed original sizes
When the original is a non-standard size, see the appropriate explanation below for the mode you are using.
► COPIER: "SELECTING THE ORIENTATION AND SIZE OF THE ORIGINAL (page 2-32)"
► FAX: "SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES (page 4-47)"
► IMAGE SEND: "SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES (page 5-52)"
Allowed original weights
1-Sided scanning: 35 g/m
2
to 220 g/m
2
(9 lbs. bond to 120 lbs. index)
2-Sided scanning: 50 g/m
2
to 220 g/m
2
(13 lbs. bond to 120 lbs. index)
To scan originals from 35 to 49 g/m
2
(9 to 13- lbs Bond), use "Slow Scan Mode" in the "Others" function. Scanning
without using "Slow Scan Mode" may result in original misfeeds.
When "Slow Scan Mode" is selected, automatic 2-sided scanning is not possible.
To scan originals from 158 g/m
2
to 220 g/m
2
(40 lbs. bond to 120 lbs. index), use "Heavy Paper Scan" in the "Others"
function. Scanning without using "Heavy Paper Scan" may result in original misfeeds.
Double Feed Detection
This automatic document feeder is equipped with a double feed detection function.
If you attempt to scan multiple originals at the same time, scanning stops as a document jam.
Set in [System Settings] → [Common Settings] → [Device Control] → [Condition Settings] → [Multifeed Detection
Settings] in "Settings (Administrator)".
Preventing skew feed
This automatic document feeder is equipped with an anti-skew feed.
When a document is scanned at an angle, scanning stops as a document jam.
Minimum original size Maximum original size
Standard size
(Minimum size that can be automatically detected)
148 mm (longitudinal) × 210 mm (transversal) or A5
5-1/2" (longitudinal) × 8-1/2" (transversal)
Non-standard size
(Minimum size that can be specified manually)
131 mm (longitudinal) × 140 mm (transversal)
5-1/8" (longitudinal) × 5-1/2" (transversal)
Business card:
51 mm x 89 mm to 55 mm x 91 mm
Standard size
(Maximum size that can be automatically detected)
297 mm (longitudinal) × 420 mm (transversal) or A3
11" (longitudinal) × 17" (transversal)
A3W (12" × 18") cannot be used.
Non-standard size
(Maximum size that can be specified manually)
Copy mode:
297 mm (longitudinal) × 432 mm (transversal)
11-5/8" (longitudinal) × 17" (transversal)
image send mode:
297 mm (longitudinal) × 1000 mm (transversal)
11" (longitudinal) × 39-3/8" (transversal)