Operation Manual, User's Manual

1-129
BEFORE USING THE MACHINE►HOW TO PLACE THE ORIGINAL
Original setting indicator
The original setting indicator lights when the document is correctly loaded on the document feeder tray.
If the original setting indicator is lit, it is possible for a user who has difficulty in confirming that a document is loaded on
the document feeder tray to confirm that the document is loaded.
1
Make sure that there is no original on the document glass.
2
Place the original.
Up to 300 sheets can be inserted.
After scanning is finished on the automatic document feeder,
remove originals from the original exit tray.
Original setting indicator ON/OFF settings
In "Settings (administrator)", select [System Settings] → [Common Settings] → [Device Control] → [Status Indicator Setting]
→ [Use Original Detection Light for Document Feeder].
Align the edges evenly
and face them up
Insert to the end
Fit to the Original Size
Below the indicator line