Operation Manual, User's Manual

1-151
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
SADDLE STITCH FINISHER (LARGE
STACKER)
This includes the offset function that outputs sorted sheets of paper while staggering each set of paper, the staple sort
function that staples each set of prints, the saddle stitch function that staples the centre of the sheets and folds the
sheets in half, and the paper folding function that folds paper in half.
Installing an optional hole punch module allows you to punch holes in printed paper.
PART NAMES
(1) Staple compiler
This temporarily stacks paper to be stapled.
(2) Output tray
Stapled and offset output is delivered to this tray.
The tray is slidable. Extend the tray for printing on
large-size paper (larger than A4 (8-1/2" × 11")).
(3) Middle output tray
Output paper that will not be offset in this tray.
The tray is slidable. Extend the tray for printing on
large-size paper (larger than A4 (8-1/2" × 11")).
(4) Saddle stitch tray
Saddle-stitched output is delivered to this tray.
(5) Front cover
Open this cover to replace the staple cartridge or remove
a staple jam.
(2)
(4)
(1)
(3)
(5)
• To install a saddle stitch finisher (large stacker), a paper pass unit is required.
• Do not place heavy objects on the saddle stitch finisher (large stacker) or press down on the saddle stitch finisher (large
stacker).
• Exercise caution when you turn on the power and when printing take place, as the tray may move up and down.
• A saddle stitch finisher (large stacker) cannot be installed simultaneously with an finisher, finisher (large stacker) or saddle
stitch finisher.