Operation Manual, User's Manual

1-162
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
PUNCH MODULE (MX-PN13A/B/C/D)
The punch module can be installed on a finisher (large stacker) or saddle stitch finisher (large stacker) to punch holes in
paper to be output.
DISCARDING PUNCH WASTE
Punch waste from punched holes is collected in the punch waste box.
Follow the operation procedure to replace punch waste.
A finisher (large stacker) or saddle stitch finisher (large stacker) is required to install the punch module (large stacker).
1
Open the front cover.
2
Grasp the punch waste box handle,
gently pull out the box, and discard the
punch waste.
Discard the punch waste in a plastic bag or other container,
taking care not to let the waste scatter.