Operation Manual, User's Manual

2-25
COPIER►BASIC PROCEDURE FOR MAKING COPIES
ENLARGE/REDUCE
AUTO RATIO SELECT
This section explains how to automatically select the appropriate ratio to meet the paper size when manually changing
the paper tray to make a copy on paper that has a size different from the original.
For a non-standard size original, the size must be entered in order to use Auto Image.
To change the default ratio:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [Copy Ratio].
1
Manually select the paper tray, and place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
SELECTING THE PAPER TRAY FOR COPYING
(page 2-12)
AUTOMATIC DOCUMENT FEEDER (page 1-127)
DOCUMENT GLASS (page 1-131)
2
Tap the [Copy Ratio] key.
COPY MODE (page 2-3)
3
Tap the [Auto Image] key.
The reduction or enlargement ratio is automatically selected
based on the original size and the selected paper size.
The automatically selected ratio will appear in the ratio
display.
To cancel the Auto Ratio Selection setting:
Tap [Auto Image] to deselect it.
To return the ratio to 100%:
Tap the [100%] key.
Preview
B/W
Start
Colour
Start
Copies
Auto Image
Slightly Reduce
(3% Reduction)
Original
Paper
By Paper Size
Copy Ratio
B4A3 A4 A4B5
B4A3 A4 A4B5
100
( 25~400 )
%
CA
Preview
B/W
Start
Colour
Start
Copies
Auto Image
Slightly Reduce
(3% Reduction)
Original
Paper
By Paper Size
Copy Ratio
B4A3 A4 A4B5
B4A3 A4 A4B5
100
( 25~400 )
%
CA