Operation Manual, User's Manual

2-46
COPIER►BASIC PROCEDURE FOR MAKING COPIES
FOLD SETTING
This function is used to fold copies before delivery to the output tray.
• To change the default fold setting:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [Fold].
• A saddle stitch finisher or saddle stitch finisher (large stacker) is required to use the fold function.
• The fold function cannot be used in combination with the staple function and punch function.
• The folding function cannot be combined with the staple function or punch function.
• You can check the selected folding method in "PREVIEW SCREEN
(page 1-14)".
1
Tap the [Detail] key to change to normal mode.
► CHANGING MODES (page 1-13)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page
2-32)
2
Tap the [Output] key, and tap the [Fold] tab.
3
Select the folding method.
After the settings are completed, tap .
Fold Inside Fold Outside
Start
Colour
Start
B/W
4
A4
Preview
Back
Change Size/Direction.
Original
Others
CA
A3
Output
Output Tray
Staple
Upper Tray
Sort/Group Punch Fold
Middle
Tray
Lower Tray
Off
Saddle
Fold
Half
Fold
Double
Fold
Detail
Accord-
ion Fold
C-Fold Z-Fold
Separator
Page
Put Multiple Pages in A Page
Margin Shift
Shift Position to Have Margin
N-Up
Erase Shadow Around
Erase
2-Sided Copy
Proof Copy
A3