Operation Manual, User's Manual

2-47
COPIER►BASIC PROCEDURE FOR MAKING COPIES
INSERTING SEPARATOR PAGES BETWEEN COPIES
OR JOBS
This function inserts separator pages between each set of copies or between each job.
When you insert separator pages between sets of copies, you can spe
cify whether to insert the separator page before or
after each set. You can also specify the number of copies that makes one set.
When you insert separator pages between jobs, you can specify wheth
er to insert a separator page before or after each
job.
Separator page insertion examples
In the following examples, four copies of a two-page original are output.
Inserting a separator page before each set
of two copies
Inserting a separator page after each set of two copies
Inserting separator pages before and after a job
• Even when this function is enabled, the Sort/Group, Staple, Punch, and Half Fold functions are not applied to separator
pages.
• Combinations of Saddle Stitch, Saddle Fold, C-Fold, Accordion Fold, Double Fold, and Trimmer cannot be used.
• The Offset function, if enabled, is also applied to separator pages.
1
Tap the [Detail] key to change to normal mode.
► CHANGING MODES (page 1-13)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page
2-32)
2
Tap the [Output] key, and tap the [Separator Page] key.
1 12 2 1 2 1 2
Insert before each set Insert before each set
1 12 2 1 2 1 2
Insert after each set Insert after each set
1 12 2 1 2 1 2
Insert Before Job Insert After Job