Operation Manual, User's Manual

2-53
COPIER►BASIC PROCEDURE FOR MAKING COPIES
COPYING BOTH SIDES OF A CARD AS A SINGLE PAGE
(CARD SHOT)
This function copies the front and reverse sides of a card on one sheet, not on separate sheets.
This function is convenient for making copies fo
r identification purposes and helps save paper.
To change the default original size during Card Shot:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Card Shot Settings].
Specify a value from 25 mm (1") to 210 mm (8-1/2") in increments of 1 mm (1/8") for both the X (horizontal) and Y (vertical)
dimensions of the original.
1
Select the paper to be used for card shot.
Set a paper by referring to the "SELECTING THE PAPER TRAY FOR COPYING (page 2-12)".
2
Tap the [Detail] key to change to normal mode.
► CHANGING MODES (page 1-13)
3
Tap the [Others] key, and tap the [Card Shot] key.
4
Tap the [On] key, and specify the
original size as required.
After the settings are completed, tap and [Back] keys in
sequence.
Back
Front
Example of an A4 (8-1/2" x 11")
size portrait copy
Example of an A4 (8-1/2" x 11")
size landscape copy
Others
Colour
Start
B/W
Start
CA
Preview
Colour Mode
Background Adjustment
Exposure
Select Type/Exposure
Card Shot
Back
Reset
Adjust to Paper Size
Size
Off
On
A4
(25~210)
mm
(25~210)
mm
Others
Card Shot
Back
Reset
Adjust to Paper Size
Size
Off
On
A4
(25~210)
mm
(25~210)
mm
4
A4
Proof Copy
A3
Others