Operation Manual, User's Manual

2-77
COPIER►OTHER FUNCTIONS
CHECKING THE NUMBER OF SCANNED ORIGINAL
SHEETS (ORIGINAL COUNT)
This function counts the number of scanned original sheets, and displays the result before making a copy.
By allowing you to check the number of origin
al sheets that were scanned, this helps reduce the occurrence of copy
mistakes.
The count result is displayed with the number of scanned original sheets, not the number of scanned original pages. For
example, when 2-sided copying is performed using one original, the number "1" will appear to indicate that one original
sheet was scanned, not "2" to indicate the front-side page and the reverse side page.
Original Count must be specified before scanning the original.
1
Tap the [Others] key, and tap the [Original Count] key.
A checkmark appears on the icon.
After the settings are completed, tap the [Back] key.
To cancel the Original Count setting:
Tap the [Original Count] key to uncheck it.
2
Place the original in the document feeder tray of the automatic document
feeder.
AUTOMATIC DOCUMENT FEEDER (page 1-127)
3
Tap the [Colour Start] or [B/W Start] key.
4
Check the number of original sheets.
The number that is displayed is the number of scanned
original sheets, not the number of scanned original pages.
For example, when 2-sided copying is performed using one
original, the number "1" will appear to indicate that one
original sheet was scanned, not "2" to indicate the front-side
page and the reverse side page.
If the displayed number of original sheets is different from the actual number of sheets
Tap the [Cancel] key to stop the job.
5
Tap the [OK] key to start copying.
If this function is combined with [Job Build], the count result is displayed after the [Read-End] key has been tapped.
2
Start
Colour
Start
Colour Mode
Full Colour
Paper Select
Auto
Exposure
Auto
Original
Auto
2-Sided Copy
1-Sided→1-Sided
Output
Copy Ratio
100%
Others
Plain
A4
A4
CA
B/W
A4 A4
B4
A3
1
3
5
4
Cancel OK
1 pages of original
have been scanned.
Copy the scanned data?