Operation Manual, User's Manual

2-140
COPIER►CONVENIENT COPY FUNCTIONS
Considerable time is required to copy the drawings each
month because the above settings must be selected.
In addition, mistakes are occasionally made when selecting
the settings, so some copies must be redone.
The settings are stored in a program, so they can be selected
by the touch of a key. This is simple and takes no time.
In addition, the settings are all stored so there are no chances
for mistakes, and thus no need to redo copies due to setting
mistakes.
• Up to 48 programs can be stored.
• Program settings remains registered even when the main power has been turned off.
• A program can also be stored in the home screen or favourite as a shortcut; therefore, it is helpful when retrieving it.
1
Specify the copy function to be stored.
In the base screen, display [Program Registration] on the action panel.
2
Tap [Program Registration] on the action panel.
3
Tap an unused key.
A key with a program stored is displayed in colour. Tap a key
with no program stored.
If you do not set a name for the program, a serial number will be automatically assigned as the name.
4
Set a name for the program and tap the
[OK] key.
A registration completion message appears.
When a job program is not stored When a job program is stored
4
3
A4
Start
Colour
Start
Preview
Others
1
01 02
03 04
05 06
07 08
09 10
Pre-Setting
Program
Program Registration
Select Program No. to Register
No. of copies
01
03
05
07
09
02
04
06
08
10
CA
B/W
Proof Copy
A3
B4
Black & White
Start
Colour
Start
Others
A34
CA
#
.com .net .org
http:/
/
.info
.biz
Program Name
Cancel OK
Space AltGrKeyboard Select
Shift
Caps
Characters Symbols
Enter