Operation Manual, User's Manual

4-97
FACSIMILE►PERFORMING F-CODE COMMUNICATION
SCANNING A DOCUMENT INTO A MEMORY BOX FOR
F-CODE POLLING TRANSMISSION
When your machine receives a transmission request from another machine, this function sends a fax stored in an
F-code memory box (polling memory) in your machine to that machine. The other machine must correctly specify the
F-code (sub-address and passcode) configured in your machine. Otherwise, transmission will not take place.
An original to be sent to the other machine using F-code polling communication must be previously scanned into an
F-code memory box (polling memory) in your machine.
If other documents have already been stored in the memory box, the document is added to the previously stored
documents.
By factory default, the document sent to the other machine will be deleted automatically.
To create F-code memory boxes:
Create in "Settings (administrator)" - [System Settings] → [Image Send Settings] → [Fax Settings] → [F-Code Memory Box].
1
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
AUTOMATIC DOCUMENT FEEDER
(page 1-127)
DOCUMENT GLASS (page 1-131)
2
Select settings for the original to be scanned and other functions.
You cannot set the Program, Timer, Transaction Report, Polling, and Document Filing.
Receiving machine
Transmission request (Polling) using an F-code
Sub Address: AAAAAAAA
Passcode: XXXXXXXX
Send
The machine
F-code polling memory box
Box Name: BBBB
Sub Address: AAAAAAAA
Passcode: XXXXXXXX