Operation Manual, User's Manual

7-2
MANUAL FINISHING►MANUAL FINISHING
MANUAL FINISHING
In manual finishing mode, you can set for finish on copied or printed pages.
You can select the manual finishing mode if the inserter is installed. When the finisher (large stacker), saddle stitch
finisher (large stacker), punch module, or folding unit is installed, finishing operations, such as stapling, punching or
folding can be performed.
SELECTING MANUAL FINISHING MODE
Change the manual finishing mode to simple mode or normal mode as explained in "CHANGING MODES (page 1-13)".
MANUAL FINISHING
Manual finishing cannot be used if the use of manual finishing or inserter is prohibited in "Settings".
To specify whether or not to prohibit the use of manual finishing or inserter:
In "Settings (administrator)", select [System Settings] → [Common Settings] → [Operation Settings] → [Disable Manual
Finishing] to set the use of manual finishing. Select [System Settings] → [Common Settings] → [Device Control] → [Disabling
of Inserter] to set the use of the inserter.
A
A
A
A
A
B
A
A
B
A
C
A
C
D
A
A
B
D