Operation Manual, User's Manual

8-35
SETTING MODE►SETTING MODE LIST
• Detect Standard in Auto Colour Mode 3 (Normal) No Yes
8-82
• Total Setting for Finish Specify Finishing
Position Based on
Paper Selected.
No Yes
• Disabling of Duplex Disabled No Yes
• Disabling of Offset Disabled No Yes
• Disabling of Stapler
*7
Disabled No Yes
• Disabling of Punch
*8
Disabled No Yes
• Disabling of Colour Mode Disabled No Yes
• Disabling of Document Feeder Disabled No Yes
• Disabling of Large Capacity Cassette
*1, 2, 3
Disabled No Yes
• Disabling of Tray Settings Disabled No Yes
• Disabling of Inserter
*9
Disabled No Yes
• Disabling of Finisher
*7
Disabled No Yes
• Disabling of Folding Unit
*10
Disabled No Yes
• Disabling of Trimming Module
*11
Disabled No Yes
• Disabling of Bypass-Tray Disabled No Yes
 Status Indicator Setting – No Yes
1-130
• Data Indicator Setting
*12
Pattern 1 No Yes
• Status Indicator will blink if data is received
*12
Enabled No Yes
• Error Light Setting
*12
Light & Blink No Yes
• Use Communication Indicator Enabled No Yes
• Use Preventive Light to Indicate Original Left Behind Enabled No Yes
 Machine Identification Settings – No Yes 8-84
 Clock Adjust No Yes
8-84
• Clock Adjust No Yes
- Current Date – No Yes
- Specify Time Zone – No Yes
- Date&Time Settings – No Yes
- Synchronize with Internet Time Server Disabled No Yes
• Daylight Saving Time Setting Disabled No Yes
Setup Items Factory default setting U A Page