PN-V701A brochure
www.sharp.co.uk
Model Name PN-V701
Installation Landscape / Portrait
LCD Panel 70-inch-class (69
1
/
2
-inch [176.6 cm] diagonal) UV
2
A LCD\
Max. Resolution 1,920 x 1,080 pixels
Max. Display Colours (approx.) 1.06 billion colours
Pixel Pitch (H x V) 0.802 x 0.802 mm
Brightness*
1
700 cd/m
2
Contrast Ratio*
1
4,000 : 1
Viewing Angle (H/V) 178°/178° (CR 10)
Active Screen Area (W x H) 1,538.9 x 865.6 mm (60
9
/
16
” x 34
1
/
16
”)
Response Time 6 ms (grey to grey, avg.)
Backlight LED, full array
Computer Input
Video Analogue RGB (0.7 Vp-p) [75 Ω], Digital (DVI 1.0 standard-compliant), DisplayPort™ 1.2, HDMI
Synchronisation Horizontal/vertical separation (TTL: positive/negative), Sync-on-green*
2
, Composite sync*
2
(TTL: positive/negative)
Plug & Play VESA DDC2B
Power Management VESA DPMS, DVI DMPM
Input Terminals*
3
HDMI*
4
x 2, Mini D-sub 15-pin x 1*
5
, DisplayPort x 1, 3.5 mm-diameter mini stereo jack x 1, RS-232C (D-sub 9-pin) x 1,
Control kit terminal x 1, DVI-D 24-pin (HDCP compatible) x 1
Output Terminals*
3
DisplayPort*
6
x 1, 3.5 mm-diameter mini stereo jack x 1, RS-232C (D-sub 9-pin) x 1
Input/Output Terminals*
3
LAN: 10Base-T/100Base-TX x 1
Expansion Slot 13 V, 2.0 A (power supplied when expanding the functions with an optional part)
Mounting VESA (4 points), 400mm x 400mm
Power Supply 100V—240V AC, 50/60 Hz
Power Consumption 380 W
Environmental Conditions
Operating Temperature 0°C to 40°C
Operating Humidity 20% to 80% RH (no condensation)
Dimensions*
7
(W x D x H) (approx.) 1,543.7 x 122 x 870.4 mm (60
3
/
4
” x 4
13
/
16
” x 34
1
/
4
”)
Weight (approx.) 37.0 kg (81.6 lbs)
Main Accessories AC power cord, cable clamp x 6, CD-ROM, set-up manual, sticker x 2 (for concealing mounting hole of remote control
sensor box)
Specifications
Dimensions Input/Output Terminals
Options
*
1
When uniformity is set to MODE 1. Brightness and contrast ratio depend on input mode and other picture settings. Brightness level will decrease slightly over the lifetime of the product. Due to the physical limitations of the
equipment, it is not possible to maintain a precisely constant level of brightness. *
2
D-sub input terminal only. *
3
Use a commercially available connection cable for PC and other video connections. *
4
For both PC and AV components.
*
5
Analogue PC, video, and component video are switchable (via the bottom interface); use the menu to select. Note that video and component video inputs require a conversion cable connected via the mini D-sub 15-pin jack.
*
6
For video signals only. *
7
Display only, not including protrusions.
HDBaseT is a trademark of HDBaseT Alliance. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States
and other countries. DisplayPort and the DisplayPort Compliance Logo are trademarks owned by the Video Electronics Standards Association in the United States and other countries. All other brand names and product names may
be trademarks or registered trademarks of their respective owners. All screen images appearing in this brochure are simulated. Design and specifications are subject to change without prior notice. ©Sharp Corporation October 2017.
Ref: PN-V701 Brochure Job:18463. All trademarks acknowledged. E&OE.
Units: mm (inch)
* Screen dimensions
* To use the VESA-standard mounting bracket, use M6 screws that are 8 to 10 mm plus the thickness of the bracket.
PN-ZB03H : HDBaseT Receiver Board
PN-ZR02 : Control Kit (remote controller and remote control sensor box)
1,543.7 (60
3
/
4
)
870.4 (34
1
/
4
)
866* (34
1
/
8
)
1,539.3* (60
5
/
8
)
200
(7
7
/
8
)
200
(7
7
/
8
)
VESA holes*
400 (15
3
/
4
)
122
(4
13
/
16
)
43
(1
11
/
16
)
70
(2
3
/
4
)
LAN portRS-232C input
PC output
(DisplayPort)
DVI-D input
PC input
(DisplayPort)
PC/AV input
(HDMI)
Control
kit
Audio output
PC analogue input
RGB (D-sub)
Audio
input
Optional
port
RS-232C
output
PN-ZB03H
LAN port
USB
HDBaseT
PN-ZB03H : HDBaseT Receiver Board
PN-ZR02 : Control Kit (remote controller and remote control sensor box)
Options
(Side) (Bottom)
[Optional Mini-OPS Board]
[standard]
1,543.7 (60
3
/
4
)
870.4 (34
1
/
4
)
866* (34
1
/
8
)
1,539.3* (60
5
/
8
)
200
(7
7
/
8
)
200
(7
7
/
8
)
VESA holes*
400 (15
3
/
4
)
122
(4
13
/
16
)
43
(1
11
/
16
)
70
(2
3
/
4
)
LAN portRS-232C input
PC output
(DisplayPort)
DVI-D input
PC input
(DisplayPort)
PC/AV input
(HDMI)
Control
kit
Audio output
PC analogue input
RGB (D-sub)
Audio
input
Optional
port
RS-232C
output
PN-ZB03H
LAN port
USB
HDBaseT
PN-ZB03H : HDBaseT Receiver Board
PN-ZR02 : Control Kit (remote controller and remote control sensor box)
Options
(Side) (Bottom)
[Optional Mini-OPS Board]
[standard]
>
=
®