COLOR TELEVISION MODEL 25C340 L OPERATION MANUAL L CONTENTS PAGE Important Information ........................................... 2, 3 Important Safeguards ........................................... 3, 4 Supplied Accessories ............................................... 5 Before Operating Your Television ............................. 5 Antenna Connections ........................................... 5, 6 Quick Reference Control Operation ......................... 7 EZ SETUP during First Power On ......
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television – built for outstanding quality, reliability and performance. Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL so that you may adjust the picture and color to your personal viewing preference.
IMPORTANT INFORMATION (Continued) CAUTION: • Do not place the AC power cord under the TV set or other heavy items. • To prevent fire, never place any type of candle or naked flames on the top or near the TV set. • To prevent fire or shock hazard, do not expose this products to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the product.
IMPORTANT SAFEGUARDS (Continued) 13. Follow all warnings and instructions marked on the television equipment. 14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
TV • CATV• VCR • DVD CH/SKIP STOP PAUSE REC VCR FF PLAY REW MUTE CATV DVD VOL + D C CH CH B VOL — A MENU 9 PERSONAL PREFERENCE 6 100 ENTER 8 0 5 7 4 FLASHBACK 3 DVD VCR 1 TV POWER DISPLAY 2 INPUT TV Supplied Accessories Infrared Remote Control/Part Number RRMCGA035WJSB Size AA Dry Batteries Before Operating Your Television Location • For normal operation, your TV should be located in an area of the room where cool adequate ventilation is provided.
Antenna Connections (Continued) F-type connector 1. A 75 ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (not supplied). 75-ohm coaxial cable (round) 2. A 300 ohm system is a flat “twin-lead” cable that can be attached to a 75 ohm terminal through a 300-75 ohm ADAPTOR (not supplied). 300-ohm twin-lead cable (flat) OUTDOOR ANTENNA CONNECTION • Use one of the following two diagrams if you connect an outdoor antenna.
Quick Reference Control Operation L Location of Controls (ENGLISH) Front Panel POWER Press → On. Press again → Off. VIDEO/AUDIO IN2 TERMINALS SENSOR AREA FOR REMOTE CONTROL MENU Press → Accesses MAIN MENU. Press again → Exits MAIN MENU. VOLUME UP/DOWN (+) Increases sound. (–) Decreases sound. CHANNEL UP/DOWN (8) Selects next higher channel. (9) Selects next lower channel. • Press both at the same time to access the MAIN MENU screen. (+) Increases sound. (–) Decreases sound.
EZ SETUP during First Power On L When you turn on the TV for the first time, it will automatically memorize the broadcasting channels. Please perform the following instructions before you press the power button. (1) Insert the batteries into the remote control. (See page 5) (2) Connect the antenna cable to the TV set. (See page 5 ~ 6) (3) Plug in the AC POWER cord to the wall outlet.
Demo Mode • To quickly learn more about the TV set, press and hold for more than three seconds both MENU or CH UP (8) and DOWN (9) on the TV set. The TV set will go into DEMO mode and briefly explain the various features. • To cancel DEMO mode, again press both MENU or CH UP (8) and DOWN (9) on the TV set.
Language L The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH. L Setting the ON SCREEN DISPLAY Language. 1 Press MENU to access MAIN MENU screen. S L E E P T I ME R V I D EO A D J U S T AUD I O S E L EC T C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E SE T UP (MAIN MENU screen) 2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET UP”.
Video Adjust Description of Adjustment Items VOLUME (+)/(–) PERSONAL PREFERENCE Selected item VOL UP (+) button PICTURE To increase contrast To decrease contrast TINT To make skin tones greenish To make skin tones purplish COLOR To increase color intensity To decrease color intensity BRIGHT To increase brightness To decrease brightness SHARP To increase sharpness To decrease sharpness FAVORITE COLOR To choose a RED, BLUE or STANDARD COLOR TONE.
Audio Select L MTS (MULTICHANNEL TV SOUND) This circuit allows reception of stereo or bilingual TV sound. 1 2 Press MENU to access MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “ ” mark to “AUDIO SELECT”. CH → CH S L E E P T I ME R V I D EO A D J U S T AUD I O S E L EC T C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E SE T UP (MAIN MENU screen) 3 Press VOL (+) or (–) to access AUDIO SELECT mode. VOL — 4 VOL + Press VOL (+) or (–) to select “STEREO”, “SAP” or “MONO”.
Closed Caption L HOW TO SET CLOSED CAPTION • Your TV is equipped with an internal Closed Caption decoder. “Closed Caption” is a system which allows you to view conversations, narration, and sound effects in TV programs and home videos as subscript on your TV screen as shown on the right. • Not all the programs and videos will offer closed caption. Please look for the “ ” symbol to ensure that captions will be shown. • Closed Caption broadcast can be viewed in two modes: CAPTION and TEXT.
Parent Control (V-CHIP Operation) L V-CHIP • This function allows you to restrict TV programs and also allows you to control TV usage based on FCC data. This function is to prevent your children from watching violence or sexual scenes that may be harmful. • Restriction of TV programs includes two characters that contain information about the program’s MPAA rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are restricted by age and contents.
Parent Control (V-CHIP Operation Continued) • TV-PARENTAL GUIDELINES (Example) Example 1.1 : Age Based setting Go through all select ratings and select unblocked for “AGE”. This will automatically unblock everything. AGE D L S V FV TV–Y TV–Y7 TV–G TV–PG TV– 1 4 TV–MA – – – – – – – – – – – – – – – – – – : V I EW V: B LOCK MENU : RETURN Example 1.2 : Age Based setting For “TV-G” select “BLOCK” for “AGE”. This will automatically block the higher age ratings “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”.
Parent Control (V-CHIP Operation Continued) L HOW TO SET V-CHIP 1 2 3 4 5 6 7 8 REMOTE KEYPAD 9 FLASHBACK VOLUME (+)/(–) ENTER 0 100 PERSONAL PREFERENCE A B C D CH VOL — VOL + CH MENU MUTE [1] MPAA RATING 1 CHANNEL UP (8)/ DOWN (9) MENU Press MENU to access MAIN MENU screen.
Parent Control (V-CHIP Operation Continued) [2] TV GUIDELINES 1 2 Repeat steps 1 to 3 of [1] MPAA RATING. Press CH UP (8) or DOWN (9) to move the “ ” mark to “TV GUIDELINES”. CH MP A A T V GU I D E L I N E S DOWN L O A D : O F F S T A TUS : OF F CH 3 Press VOL (+) or (–) to access TV GUIDELINES mode.
Parent Control (V-CHIP Operation Continued) [3] ADDITIONAL MODE (DOWNLOAD) There will be an additional new rating system. In that case, please set up as follows. Subsequently the new rating system will set up automatically. 1 2 Repeat steps 1 to 3 of [1] MPAA RATING. MP A A T V GU I D E L I N E S Press CH UP (8) or DOWN (9) to move the “ ” mark to “DOWNLOAD”. CH DOWN L O A D : O F F S T A TUS : OF F CH 3 Press VOL (+) or (–) to “DOWNLOAD : ON”.
Parent Control (V-CHIP Operation Continued) • ADDITIONAL MODE (Example) 1 2 Repeat steps 1 to 2 of [3] ADDITIONAL MODE. Press CH UP (8) or DOWN (9) to move the “ ” mark to “Cdn. English Ratings”, then press VOL (+) or (–). CH → VOL — VOL + MPAA TV GU I DE L I NES Cd n . E n g l i s h R a t i n g s Cd n .
Parent Control (V-CHIP Operation Continued) L ACTIVATE ON TO TURN ON V-CHIP BLOCK 1 Press CH UP (8) or DOWN (9) to move the “ ” mark to “STATUS”, then press VOL (+) or (–) to activate ON the V-CHIP BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not be operated.) CH → VOL — VOL + MP A A T V GU I D E L I N E S DOWN L O A D : O F F S T A TUS : ON CH 2 Press MENU, then “INPUT SECRET No.” will be displayed. I NPUT – 3 – – No . – Enter the 4-digit SECRET No. using the REMOTE KEYPAD.
Parent Control (V-CHIP Operation Continued) L To change the V-CHIP BLOCK setting. (Secret No. is registered.) 1 Repeat steps 1 to 3 of [1] MPAA RATING, then “INPUT SECRET No.” will be displayed. I NPUT – 2 Enter the 4-digit SECRET No. using the REMOTE KEYPAD and the V-CHIP select mode will be displayed. Repeat configuration of the V-CHIP BLOCK. I NPUT S E CRE T – – No . – S E CRE T No . ∗ ∗ ∗ ∗ L If you intend to change or forget your Secret No., clear the original Secret No.
Parent Control (VIEW TIMER) L VIEW TIMER This function allows you to restrict TV viewing time and also allows you to control TV usage. This function is to prevent your children from watching too much TV. VIEWING TIME (an accumulative timer: counts only the time duration acquired while the TV is on.) • VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10 hours) in 30 minutes intervals. V I EW T I ME R OFF TIME (Restricts TV watching after the VIEWING TIME reaches V I EW I NG T I ME zero.
Parent Control (VIEW TIMER Continued) 9 Enter the 4-digit SECRET No. using the REMOTE KEYPAD. 10 Press MENU, and SECRET No. is registered. 1 2 4 5 7 8 1 S E CR E T 2 3 No . 4 6 9 → ENTER 0 I NPUT 3 100 Example • To restrict anybody from watching the TV for 5 hours, after watching the TV for 2 hours, your settings would look like this: • They can choose to watch the 2 hours of TV however they wish.
Parent Control (VIEW TIMER Continued) 2 (On the Set) Press and hold both VOL (+) and CH DOWN (9) on the TV set simultaneously until the VIEW TIMER access screen is displayed. Now you can cancel the VIEW TIMER settings or can change the SECRET No. while “INPUT SECRET No.” is displayed. VOL (+)/CHANNEL DOWN (9) buttons L Notice of Remaining VIEWING TIME • For every 30 minute interval, the “remaining time” will be displayed for 4 seconds.
Set Up L EZ SETUP By operating the channel presetting functions, you can preset your TV to the desired channels for viewing. 1 2 3 4 5 6 7 8 REMOTE KEYPAD 9 VOLUME (+)/(–) ENTER FLASHBACK 0 100 PERSONAL PREFERENCE A B C D CHANNEL UP (8)/ DOWN (9) MENU CH VOL — VOL + CH MENU 1 2 Press MENU to access MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET UP”.
Set Up (Continued) L CHANNEL SETTING If EZ SETUP does not memorize all the channels in your region, follow the instructions below to manually memorize the channel. 1 2 Press MENU to access MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET UP”. → CH CH S L E E P T I ME R V I D EO A D J U S T AUD I O S E L EC T C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E SE T UP (MAIN MENU screen) 3 4 Press VOL (+) or (–) to access SET UP mode.
Set Up (Continued) L Saving broadcast TV channels into memory. 1.1 Press MENU to access MAIN MENU screen, then press CH UP (8) or DOWN (9) to move the “ ” mark to “SET UP”. Press VOL (+) or (–) to access SET UP mode, then press CH UP (8) or DOWN ( 9 ) to move the “ ” mark to “CH SETTING”. Press VOL (+) or (–) to access CH SETTING screen. Press CH UP (8) or DOWN (9) to move the “ ” mark to “CH SEARCH”, then press VOL (+) or (–) to access CH SEARCH screen. 1.2 1.3 1.
Set Up (Continued) 2.4 Press MENU to exit. VOL (+) To add channel 12 to the TV memory CH MEMOR Y AIR 12 TO ADD (CH MEMORY unmemorized channel) VOL (–) To erase channel 12 from the TV memory B C D CH VOL — VOL + CH MENU MUTE C H MEMOR Y AIR : + VOLUME (+)/(–) PERSONAL PREFERENCE A 12 CATV TV DVD VCR CHANNEL UP (8)/ DOWN (9) MENU TO ERASE : – (CH MEMORY memorized channel) L BLUE SCREEN Automatically turns the screen blue if a broadcast signal is not received.
Set Up (Continued) L PERSONAL PREFERENCE By setting the PERSONAL PREFERENCE channels in advance, you can select your favorite channels easily. 1 2 3 4 5 6 7 8 FLASHBACK PERSONAL PREFERENCE 9 ENTER 0 100 PERSONAL PREFERENCE A B C VOL + CH MENU VOLUME (+)/(–) D CH VOL — REMOTE KEYPAD MUTE CHANNEL UP (8)/ DOWN (9) MENU 1 2 Press MENU to access MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “ UP”.
Set Up (Continued) L UNIVERSAL PLUS FUNCTION VCR or DVD input mode will be selected automatically by pressing VCR or DVD PLAY button on UNIVERSAL REMOTE CONTROL. B C D CH VOL — VOL + CH MENU 1 2 Press MENU to access MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “ UP”.
Using the Video and Audio Input Terminals • Connecting video equipment for playback of video material. • To view video material from external video equipment, make sure to connect the equipment properly to the input terminals on the TV set.
Using the Video and Audio Input Terminals (Continued) Notes: • The IN 1 S-VIDEO terminal is used to obtain a higher quality image by importing image signals. separated into color and brightness signals. • The S-VIDEO terminal is for the video image only. To receive an audio signal, connect the audio cable to the IN 1 AUDIO terminals (left and right).
Operation of Remote Control L “Identifying” Remote VCRs, cable TV conveters and DVDs Your Remote Control has been set at the factory to operate your TV and many remote control VCRs, cable TV converters and DVDs. However, in some cases an easy one-time setup step may be necessary before the Remote will operate accessory VCRs, cable TV converters and DVDs. • In this set-up step, the Remote locates and memorizes the remote control transmitter code for the VCR, cable TV converters and DVDs.
Operation of Remote Control (Continued) DVD/VCR POWER POWER DVD VCR TV TV POWER DISPLAY INPUT DISPLAY REMOTE KEYPAD 1 2 3 4 5 6 7 8 9 ENTER FLASHBACK 0 100 PERSONAL PREFERENCE A B C D CH VOL — VOL + CH MENU VCR FF PAUSE STOP REC (1) Slide CATV/DVD-TV/VCR switch to VCR. (2) Press and hold down DISPLAY and CH DOWN (9) on your remote control. Then release both buttons.
Operation of Remote Control (Continued) VCR BRAND POWER DVD VCR TV TV POWER DISPLAY DISPLAY 1 2 3 4 5 6 7 8 9 REMOTE KEYPAD ENTER FLASHBACK 0 100 PERSONAL PREFERENCE A B C D CH VOL + VOL — CH MENU CHANNEL UP (8)/ DOWN (9) MUTE CATV TV DVD VCR REW PLAY FF PAUSE STOP REC REMOTE CONTROL CODE NUMBER INPUT CATV/DVDTV/VCR CH/SKIP TIPS ON IDENTIFYING YOUR VCR: If your VCR model does not have the CHANNEL UP function on its remote control, it cannot be identified using the SEA
Operation of Remote Control (Continued) DVD/VCR POWER POWER DVD VCR TV TV POWER DISPLAY INPUT INPUT 1 REMOTE KEYPAD 2 4 5 7 8 3 DISPLAY 6 9 ENTER FLASHBACK 0 100 PERSONAL PREFERENCE A B C D CH VOL — VOL + CH MENU VCR FF PAUSE STOP REC L To Identify Your DVD – Direct Entry Method. Use the following steps and list to quickly find the remote control code for your accessory DVD.
Operation of Remote Control (Continued) L HOW TO IDENTIFY A CABLE CONVERTER L To Identify Your Cable Converter –Direct Entry Method. Use the following steps and list to quickly find the remote control code for your cable TV converter. • First look up your converter’s remote code number before going through the direct code entry steps below. • If this procedure does not identify your converter, use the Search method of identification. (1) Slide CATV /DVD-TV/VCR switch to CATV.
Before Calling for Service PROBLEM QUICK SERVICE CHECK LIST No Playback of VCR and Disc Player No Picture or Sound from External Video/Audio Products Remote Control Doesn’t Work Bars on Screen Picture Distorted Picture Rolls Vertically No Color Poor Reception on Some Channels Weak Picture Lines or Streaks in Picture Ghosts in Picture Picture Blurred Sound OK, Picture Poor Picture OK, Sound Poor No Picture or Sound Dark and Blank Picture External Electrical Noise Interfering with TV’s Operation Color on P
Specifications MODEL 25C340 Receiving System NTSC Reception Channels AIR VHF 2-13 ch UHF 14-69 ch CATV 1-125 ch Channel Tuning 181-channel Reception PLL tuning system Antenna Input Impedance VHF/UHF 75 ohm Unbalance Screen Size 25˝ Diagonally Measured Terminals Audio/Video input x 2 (Front x 1, Rear x 1), S-Video input x 1 (Rear) Sound Output 1.5 W (RMS) x 2 Power Source AC 120 V, 60 Hz Power Consumption 103 W Dimensions 2445/64˝ (W) x 2211/64˝ (H) x 209/32˝ (D) [626.
(ESPAÑOL) Lea estas instrucciones cuidadosamente y consérvelas a la mano para consultarlas en el futuro. IMPORTANTE Sírvase anotar el modelo del televisor y los números de serie en el espacio provisto, para ayudar a reportar en caso de pérdida o robo. Los números están ubicados en la parte posterior del televisor.
INFORMACIÓN IMPORTANTE (Continuación) PRECAUCIÓN: • No coloque el cable de alimentación de CA debajo del televisor u otro elemento pesado. • Para impedir un incendio, no ponga nunca ningún tipo de vela o llama al descubierto encima o cerca del televisor. • Para impedir un incendio o una descarga eléctrica, no exponga este aparato al goteo ni a las salpicaduras. Tampoco deberán ponerse encima de los productos objetos llenos de líquidos como, por ejemplo, floreros.
MEDIDAS DE SEGURIDAD IMPORTANTES (Continuación) 13. 14. Cumpla con todos los avisos y las instrucciones marcados en el televisor. Si se conecta una antena exterior al televisor, asegúrese de que el sistema de antena esté conectado a tierra para obtener cierta protección ante los aumentos de voltaje y la acumulación de cargas estáticas.
Referencia rápida de los controles de operación L Ubicación de los controles (ESPAÑOL) Panel Delantero ALIMENTACION (POWER) Pulsando → Enciende (On). Pulsando nuevamente → Apaga (Off). TERMINALES DE ENTRADA VIDEO/AUDIO IN2 ZONA DEL SENSOR DEL MANDO A DISTANCIA MENU (MENU) Pulsando → Accede al MENU PRINCIPAL. Pulsando nuevamente → Sale del MENU PRINCIPAL. AUMENTO/DISMINUCION DEL VOLUMEN (VOL) (+) Aumenta el sonido. (–) Disminuye el sonido.
Antes de llamar al servicio de reparaciones PROBLEMA LISTA DE COMPROBACIONES DE SERVICIO RAPIDO POSIBLE SOLUCIÓN Pruebe con otro canal y si todo está bien, el problema puede ser de la emisora. Está conectado el televisor? Llega electricidad al tomacorrientes? Está conectado el interruptor del televisor? Está conectado la antena al terminal del panel posterior del televisor? Si utiliza una antena exterior, cerciórese de que el cable no esté dañado. Compruebe si hay interferencia local.
(FRANÇAIS) Lisez attentivement ces instructions et gardez-les à proximité pour toute référence ultérieure. IMPORTANT Afin de vous aider en cas de perte ou de vol, inscrivez les numéros de série et de modèle du téléviseur dans les espaces fournis à cet effet. Ces numéros sont situés à l’arrière du téléviseur.
INFORMATIONS IMPORTANTES (Suite) ATTENTION: • Ne placez pas le cordon d’alimentation sous le téléviseur ou sous tout autre objet lourd. • Ne placez pas de bougies ni de flammes nues sur le téléviseur ou à sa proximité, afin d’éviter les incendies. • Veillez à ne pas éclabousser ni faire tomber de l’eau sur ces appareils afin d’éviter les incendies ou les électrocutions. Ne placez jamais d’objets remplis de liquide, comme des vases, sur ces appareils.
PRÉCAUTIONS IMPORTANTES (Suite) 13. Respectez tous les avertissements et instructions mentionnés sur la télévision. 14. Si une antenne extérieure est raccordée à la télévision, veillez à ce que le système d’antenne soit relié à la terre de façon à fournir une protection vis-à-vis des poussées de tension et des charges électrostatiques accumulées.
Référence rapide sur les commandes L Emplacement des touches (FRANÇAIS) Panneau Avant ALIMENTATION (POWER) Appuyer pour mettre sous tension. Appuyer de nouveau pour mettre hors tension. PRISES D’ENTRÉE VIDÉO/ AUDIO IN2 ZONE DE DETECTION DU CAPTEUR RÉGLAGE (MENU) Appuyer → Accès au MENU PRINCIPAL. Appuyer de nouveau → Sortie du MENU PRINCIPAL. AUGMENTATION/RÉDUCTION DU VOLUME SONORE (VOL) (+) Pour augmenter le volume du son. (–) Pour diminuer le volume du son.
Avant d’appeler un réparateur SOLUTION POSSIBLE Image affaiblie Lignes ou rayures dans l’image Images fantômes Image brouillée Son normal, image médiocre Image normale, son médiocre Ni son, ni image Image sombre et vide Bruit électrique extérieur interférant avec le fonctionnement du téléviseur La couleur sur une partie de l’écran semble altérée PROBLÉME LISTE DES VÉRIFICATIONS POUR UN DÉPANNAGE RAPIDE Pas de reproduction d’un magnétoscope ou lecteur de disque Pas d’image ou de son d’un appareil vidéo/
Limited Warranty CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.