COLOR TELEVISION MODEL 27R-FS1 L OPERATION MANUAL L As an ENERGY STAR ® Partner, SHARP has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered trademark. CONTENTS PAGE • IMPORTANT INFORMATION/IMPORTANT SAFEGUARDS ................................................ 2 ~ 10 • Supplied Accessories ............................................. 11 • Before Operating Your Television ........................... 11 • Antenna Connections ..........
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television – built for outstanding quality, reliability and performance. Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL so that you may adjust the picture and color to your personal viewing preference.
IMPORTANT INFORMATION (Continued) WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. PRODUCT DISPOSAL This product utilizes a Cathode Ray Tube (CRT) containing lead and tin lead solder. Disposal of these materials may be regulated due to environment considerations.
IMPORTANT SAFEGUARDS (Continued) 14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
(ESPAÑOL) Lea estas instrucciones cuidadosamente y consérvelas a la mano para consultarlas en el futuro. IMPORTANTE Sírvase anotar el modelo del televisor y los números de serie en el espacio provisto, para ayudar a reportar en caso de pérdida o robo. Los números están ubicados en la parte posterior del televisor.
INFORMACIÓN IMPORTANTE (Continuación) ADVERTENCIA - Las Normas de la FCC establecen que cualquier cambio o modificación no autorizada que se realice en este equipo y que no esté expresamente aprobado por el fabricante podría anular la autoridad del usuario para utilizar este equipo. DESECHO DEL PRODUCTO Este producto utiliza un Tubo de rayos catódicos (TRC) que contiene soldadura de estaño y plomo. El desecho de estos materiales deberá ser considerando regulaciones ambientales.
MEDIDAS DE SEGURIDAD IMPORTANTES (Continuación) 14. Si hay una antena exterior conectada al televisor, asegúrese de que el sistema de antena está conectado a tierra, para obtener así cierta protección contra la sobretensión y contra las cargas de electricidad estática acumulada. EJEMPLO DE CONEXIÓN A TIERRA DE UNA ANTENA SEGÚN EL CÓDIGO ELÉCTRICO NACIONAL.
(FRANÇAIS) Lisez attentivement ces instructions et gardez-les à proximité pour toute référence ultérieure. IMPORTANT Afin de vous aider en cas de perte ou de vol, inscrivez les numéros de série et de modèle du téléviseur dans les espaces fournis à cet effet. Ces numéros sont situés à l’arrière du téléviseur.
INFORMATIONS IMPORTANTES (suite) AVERTISSEMENT - Les réglementations FCC établissent que des changements ou des modifications non autorisés sur cet équipement et non approuvés expressément par le fabricant peuvent annuler tout pouvoir de l’utilisateur sur le fonctionnement de cet équipement. MISE AU REBUT DU PRODUIT Ce produit utilise un tube à rayons cathodiques (TRC) contenant du plomb à braser et du brasage tendre. La mise au rebut de ces matières peut être réglementée pour des raisons environnementales.
PRÉCAUTIONS IMPORTANTES (suite) 14. Si une antenne extérieure est raccordée à la télévision, veillez à ce que le système d’antenne soit relié à la terre de façon à fournir une protection vis-à-vis des poussées de tension et des charges électrostatiques accumulées.
STOP PAUSE MENU TV • CATV • VCR • DVD CH/SKIP TV VCR REC PLAY REW FF MUTE DVD VOL + D CATV CH CH VOL — 9 C B A PERSONAL PREFERENCE 6 100 ENTER 8 0 5 7 4 FLASHBACK 3 DVD VCR 1 TV POWER DISPLAY 2 INPUT Supplied Accessories Infrared Remote Control/Part Number RRMCG1626CESB Size AA Dry Batteries Before Operating Your Television Location • For normal operation, your TV should be located in an area of the room where cool adequate ventilation is provided.
Antenna Connections (Continued) F-type connector 1. A 75 ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (not supplied). 75-ohm coaxial cable (round) 2. A 300 ohm system is a flat “twin-lead” cable that can be attached to a 75 ohm terminal through a 300-75 ohm ADAPTOR (not supplied). 300-ohm twin-lead cable (flat) OUTDOOR ANTENNA CONNECTION • Use one of the following two diagrams if you connect an outdoor antenna.
Quick Reference Control Operation L Location of Controls (ENGLISH) Front Panel POWER Press → On. Press again → Off. VIDEO/AUDIO IN 2 TERMINALS SENSOR AREA FOR REMOTE CONTROL VOLUME UP/DOWN (+) Increases sound. (–) Decreases sound. (INSIDE DOOR) MENU. Press → Accesses MAIN MENU. Press again → Exits MAIN MENU. CHANNEL UP/DOWN (8) Selects next higher channel. (9) Selects next lower channel. Basic Remote Control Functions Infrared Transmitter Window POWER Press → On. Press again → Off.
Referencia rápida de los controles de operación L Ubicación de los controles (ESPAÑOL) Panel Delantero ALIMENTACION (POWER) Pulsando → Enciende (On). Pulsando nuevamente → Apaga (Off). ZONA DEL SENSOR DEL MANDO A DISTANCIA AUMENTO/DISMINUCION DEL VOLUMEN (VOL) (+) Aumenta el sonido. (–) Disminuye el sonido. TERMINALES DE ENTRADA SVIDEO,VIDEO/AUDIO IN 2 (POR DENTRO DE LA PUERTA) CANAL SUPERIOR/INFERIOR (CH) – MENU (8) Selecciona el siguiente canal superior. (9) Selecciona el siguiente canal inferior.
Référence rapide sur les commandes L Emplacement des touches (FRANÇAIS) Panneau Avant ALIMENTATION (POWER) Appuyer pour mettre sous tension. Appuyer de nouveau pour mettre hors tension. ZONE DE DETECTION DU CAPTEUR AUGMENTATION/RÉDUCTION DU VOLUME SONORE (VOL) (+) Pour augmenter le volume du son. (–) Pour diminuer le volume du son. PRISES D’ENTRÉE VIDÉO/ AUDIO IN 2 (DERRIERE LE VOLET) TOUCHES DES CANAUX CROISSANT/ DÉCROISSANT (CH) – MENU (8) Sélectionne le canal supérieur suivant.
EZ SETUP during First Use L When you turn on the TV for the first time, it will automatically memorize the broadcast channels. Please perform the following instructions before pressing the power button. (1) Insert the batteries into the remote control. (See page 11) (2) Connect the antenna cable to the TV set. (See page 11 ~ 12) (3) Plug in the AC POWER cord to the wall outlet.
Demo Mode L Using the Remote Control POWER DVD VCR TV DISPLAY 1 2 4 5 7 8 INPUT 3 6 9 ENTER FLASHBACK 0 VOLUME (+)/(–) 100 PERSONAL PREFERENCE A B C D CH VOL + VOL — CH MENU MUTE CATV TV DVD VCR CHANNEL UP (8)/ DOWN (9) MENU 1 2 Press MENU to access the MAIN MENU screen. ME N U Press CH UP (8) or DOWN (9) to move the “a” mark to “SETUP”.
Accessing the MAIN MENU screen without Remote Control • If you misplaced your Remote Control you can still access most settings via the MAIN MENU screen when you press MENU on the TV set. • Some features of your TV set will not be accessible without the Remote Control. If you lost your Remote Control, contact a Sharp Service Center for a replacement. (On the Set) MENU button Language L The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.
Sleep Timer L You can preset your television to turn off automatically in increments of 30, 60, 90 or 120 minutes. 1 2 Press MENU to access the MAIN MENU screen. ME N U Press VOL (+) or (–) to access sleep timer mode. → VOL — VOL + S L E E P T I ME R V I D EO A D J US T A UD I O A D J US T C L O S E D C A P T I ON P A R E N T A L CON T RO L CH S E TU P S E TUP (MAIN MENU screen) 3 Press VOL (+) or (–) to set a sleep time of 30, 60, 90 or 120 minutes.
Video Adjust Description of Adjustment Items POWER DVD VCR TV Selected item VOL UP (+) button VOL DOWN (–) button 1 2 3 PICTURE To increase contrast To decrease contrast 4 5 6 TINT To make skin tones greenish To make skin tones purplish 7 8 COLOR To increase color intensity To decrease color intensity BRIGHT To increase brightness To decrease brightness DISPLAY INPUT 9 ENTER FLASHBACK 0 100 VOLUME (+)/(–) PERSONAL PREFERENCE A B C D CH VOL — SHARP To increase sharpness
Audio Adjust L MTS (Multichannel TV Sound) This circuit allows reception of stereo or bilingual TV sound. L INTERNAL SPEAKER SWITCH This function turns the TV’s internal speakers “ON” or “OFF” when listening to sound from external speakers by using the AUDIO OUTPUT JACKS on page 46. L FAO (Fixed Audio Output) This function turns the TV’s internal speakers “OFF” and allows fixed audio output from the AUDIO OUTPUT JACKS on page 46. With FAO, the TV’s volume control is disabled.
Audio Adjust (Continued) 3 Press VOL (+) or (–) to access AUDIO ADJUST mode. Press CH UP (8) or DOWN (9) to move the “a” mark to “TREBLE”, “BASS” or “BALANCE”. VOL — VOL + CH → CH 4 Press CH UP (8) or DOWN (9) to move the “a” mark to “the item (Ex. TREBLE)” you wish to adjust. Press VOL (+) or (–) to access TREBLE adjust mode, then press VOL (+) or (–) to adjust “TREBLE”.
Closed Caption L HOW TO SET CLOSED CAPTION • Your TV is equipped with an internal Closed Caption decoder. “Closed Caption” is a system which allows you to view conversations, narration, and sound effects in TV programs and home videos as subscript on your TV screen as shown on the right. • Not all the programs and videos will offer closed caption. Please look for the “ ” symbol to ensure that captions will be shown. • Closed Caption broadcast can be viewed in two modes: CAPTION and TEXT.
Parental Control (V-CHIP Operation) L V-CHIP • This function allows you to restrict TV programs and also allows you to control TV usage based on FCC data. This function is to prevent your children from watching violence or sexual scenes that may be harmful. • Restriction of TV programs includes two characters that contain information about the program’s MPAA rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are restricted by age and contents.
Parental Control (V-CHIP Operation Continued) • TV-PARENTAL GUIDELINES (Example) Example 1.1 : Age Based setting Go through all select ratings and select unblocked for “AGE”. This will automatically unblock everything. A GE TV – Y TV – Y7 TV –G T V – PG TV – 1 4 T V – MA RE T URN D – – – L – – – S – – – V – – – – FV – – – – – V : B L OC K Example 1.2 : Age Based setting For “TV-G” select “BLOCK” for “AGE”.
Parental Control (V-CHIP Operation Continued) L HOW TO SET V-CHIP 1 2 3 4 5 6 7 8 FLASHBACK 9 ENTER 0 100 REMOTE KEYPAD VOLUME (+)/(–) PERSONAL PREFERENCE A B C D CH VOL — VOL + CH MENU [1] MPAA RATING 1 2 MUTE CHANNEL UP (8)/ DOWN (9) MENU Press MENU to access the MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “a” mark to “PARENT CONTROL”.
Parental Control (V-CHIP Operation Continued) [2] TV GUIDELINES 1 2 Repeat steps 1 to 4 of [1] MPAA RATING. V – CH I P Press CH UP (8) or DOWN (9) to move the “a” mark to “TV GUIDELINES”. CH B L OC K MP A A T V GU I D E L I N E S O P T I ON S ECRE T N o : – – – – S T A TUS : OF F CH 3 Press VOL (+) or (–) to access TV GUIDELINES mode.
Parent Control Parental Control (V-CHIP (V-CHIP Operation Operation Continued Continued) ) [3] ADDITIONAL MODE (DOWNLOAD) There will be an additional new rating system. In that case, please set up as follows. Subsequently the new rating system will set up automatically. 1 2 Repeat steps 1 to 4 of [1] MPAA RATING. V - CH I P Press CH UP (8) or DOWN (9) to move the “a” mark to “OPTION”.
Parental Control (V-CHIP Operation Continued) • How to set ADDITIONAL MODE (Example) 1 2 Repeat steps 1 to 3 of [3] ADDITIONAL MODE. O P T I ON Press CH UP (8) or DOWN (9) to move the “a” mark to “Cdn. English Ratings”, then press VOL (+) or (–). CANAD I AN CANAD I AN CH → E NG L I S H F REN CH DOWN L O A D : ON RE T URN VOL — VOL + CH (After download the rating data) 3 You can select “BLOCK” or “– – – – –” (unblock) from each RATING mode by pressing CH UP (8) or DOWN (9) and VOL (+) or (–).
Parental Control (V-CHIP Operation Continued) L Turning On (Activating) the V-Chip Blocks 1 2 Repeat steps 1 to 4 of [1] MPAA RATING. Press CH UP (8) or DOWN (9) to move the “a” mark to “SECRET No.”. CH V - CH I P B L OC K MP A A T V GU I D E L I N E S O P T I ON S ECRE T N o : – – – – S T A TUS : OF F CH 3 Enter a 4-digit SECRET No. using the REMOTE KEYPAD.
Parental Control (V-CHIP Operation Continued) L To change the V-CHIP BLOCK setting. (Secret No. is registered.) 1 2 Repeat steps 1 to 3 of [1] MPAA RATING, then “INPUT SECRET No.” will be displayed. Enter the 4-digit SECRET No. using the REMOTE KEYPAD and the V-CHIP select mode will be displayed. Repeat configuration of the V-CHIP BLOCK. 1 2 3 4 5 6 7 8 I NP U T – I NP U T S E CRE T – – No . – S E CRE T No . ∗ ∗ ∗ ∗ 9 ENTER 0 100 L If you forget or need to change your Secret No.
Parental Control (VIEW TIMER) L VIEW TIMER This function allows you to restrict TV viewing time and also allows you to control TV usage. This function is to prevent your children from watching too much TV. VIEWING TIME (an accumulative timer: counts only the time duration acquired while the TV is on.) • VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10 V I EW T I ME R hours) in 30 minutes intervals.
Parental Control (VIEW TIMER Continued) 8 Enter the 4-digit SECRET No. using the REMOTE KEYPAD. 1 2 4 5 7 8 V I EW T I ME R V I EW I NG T I ME 2 H : 0 0M T I ME 5 H : 0 0M S E C R ET N o : 1 2 3 4 S T A TUS : OFF 3 OF F 6 9 ENTER 0 9 100 Press CH UP (8) or DOWN (9) to select “STATUS”. Press the VOL (+) or (–) to turn ON the “VIEWing TIMER”.
Parental Control (VIEW TIMER Continued) L To cancel the VIEW TIMER (While the TV set is OFF but the VIEW TIMER is set) 1 Turn on TV; a blue screen message “TIME OVER” will appear. If you do nothing, the TV will turn off in approximately 30 seconds. T I ME OV E R I NP U T – 2 Enter the 4-digit SECRET No. using the REMOTE KEYPAD. When you choose the correct SECRET No., the VIEW TIMER is canceled. If the wrong SECRET No. is chosen, “SECRET No. IS INCORRECT” is displayed. Input the SECRET No.
Ch Setup L EZ SETUP By operating the channel preset functions, you can preset your TV to the desired channels for viewing. 1 2 3 4 5 6 7 8 REMOTE KEYPAD 9 VOLUME (+)/(–) ENTER FLASHBACK 0 100 PERSONAL PREFERENCE A B C D CHANNEL UP (8)/ DOWN (9) MENU CH VOL — VOL + CH MENU 1 2 Press MENU to access the MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “a” mark to “CH SETUP”.
Ch Setup (Continued) L CHANNEL SETTING If EZ SETUP does not memorize all the channels in your region, follow the instructions below to manually memorize the channel. 1 AIR/CABLE setting 1 2 Press MENU to access the MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “a” mark to “CH SETUP”.
Ch Setup (Continued) 2 How to saving broadcast TV channels into memory. POWER DVD VCR TV DISPLAY INPUT 1 2 3 4 5 6 7 8 9 ENTER FLASHBACK 0 100 VOLUME (+)/(–) PERSONAL PREFERENCE A B C D CH VOL — VOL + CH MENU MUTE CATV TV DVD VCR CHANNEL UP (8)/ DOWN (9) MENU 1.1 1.2 1.3 Press MENU to access the MAIN MENU screen, then press CH UP (8) or DOWN (9) to move the “a” mark to “CH SETUP”.
Ch Setup (Continued) 3 1 How to adding weak or additional channels or erasing unwanted channels from TV memory. Press MENU to access the MAIN MENU screen, then press CH UP (8) or DOWN (9) to move the “a” mark to “CH SETUP”.
Ch Setup (Continued) L PERSONAL PREFERENCE By setting the PERSONAL PREFERENCE channels in advance, you can select your favorite channels easily. 1 2 3 4 5 6 7 8 9 VOLUME (+)/(–) ENTER FLASHBACK 0 PERSONAL PREFERENCE REMOTE KEYPAD 100 PERSONAL PREFERENCE A B C D CHANNEL UP (8)/ DOWN (9) CH VOL — VOL + CH MENU MUTE MENU 1 2 Press MENU to access the MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “a” mark to “CH SETUP”.
Ch Set up (Continued) L UNIVERSAL PLUS FUNCTION VCR or DVD input mode will be selected automatically by pressing the VCR or DVD PLAY buttons on the UNIVERSAL REMOTE CONTROL. 1 2 Press MENU to access the MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “a” mark to “CH SETUP”.
Set Up L ENERGY SAVE This feature lets you lower the power consumption of your TV set which in turn saves you money and minimizes the impact on the environment. When this feature is turned on, it reduecs the brightness of the TV to a level that consumes approximately 20 percent less energy than when the feature is turned off. The reduction in brightness will be less noticeable under low room lighting conditions.
Set Up (Continued) L SCREEN FORMAT The format of the picture can be adjusted to any of three screen formats. POWER DVD VCR TV DISPLAY 1 2 4 5 7 8 INPUT 3 6 9 ENTER FLASHBACK 0 100 VOLUME (+)/(–) PERSONAL PREFERENCE A B C D CH VOL — VOL + CH MENU MUTE CATV TV DVD VCR CHANNEL UP (8)/ DOWN (9) MENU 1 2 Press MENU to access the MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “a” mark to “SETUP”.
Set up (Continued) L AUTO INPUT The unit will switch to the INPUT 2 screen automatically when VIDEO equipment is connected to the INPUT 2 terminal. To switch this feature off, plese do the following:. 1 2 Press MENU to access the MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “a” mark to “SET UP”.
Using the Video and Audio Input Jacks L Connecting video equipment for playback of video material. • When the television is connected to video equipment as shown below, the material being played back on the video equipment can be seen on the television screen. Connecting video device equipped with video output terminals.
Using the Video and Audio Input Jacks (Continued) Notes: • The S-VIDEO INPUT terminals (IN 1, IN 2) used to obtain a higher quality image by importing image signals separated into color and brightness signals. • Each S-VIDEO INPUT terminal is for the video image only. To receive an audio signal, connect the audio cable to the IN 1 or IN 2 AUDIO terminals (left and right).
Using the Audio Output Jacks L These jacks are used for connecting an external audio amplifier. The STEREO/MONO/SAP, VOLUME, MUTE and FAO functions can all be controlled via the television’s remote control or directly on the TV itself. These jacks relay the audio signal of all programs being displayed on the TV screen. (AUDIO OUTPUT JACKS are located on the rear of the cabinet.
Operation of Remote Control L “Identifying” Remote VCRs, cable TV conveters and DVDs Your Remote Control has been set at the factory to operate your TV and many remote control VCRs, cable TV converters and DVDs. However, in some cases an easy one-time setup step may be necessary before the Remote will operate accessory VCRs, cable TV converters and DVDs. • In this set-up step, the Remote locates and memorizes the remote control transmitter code for the VCR, cable TV converters and DVDs.
Operation of Remote Control (Continued) DVD/VCR POWER POWER DVD VCR TV TV POWER DISPLAY INPUT DISPLAY REMOTE KEYPAD 1 2 3 4 5 6 7 8 9 ENTER FLASHBACK 0 100 PERSONAL PREFERENCE A B C D CH VOL — VOL + CH MENU MUTE CATV TV DVD VCR REW PLAY FF PAUSE STOP REC L HOW TO IDENTIFY A VCR The remote control may already be set to operate your VCR. Try this initial check before going on to the following “identify” section. (1) Slide CATV/DVD-TV/VCR switch to VCR.
Operation of Remote Control (Continued) VCR BRAND POWER DVD VCR TV TV POWER DISPLAY INPUT DISPLAY 1 2 3 4 5 6 7 8 REMOTE KEYPAD 9 ENTER FLASHBACK 0 100 PERSONAL PREFERENCE A B C D CH VOL + VOL — CH MENU CHANNEL UP (8)/ DOWN (9) MUTE CATV TV DVD VCR REW PLAY FF PAUSE STOP REC REMOTE CONTROL CODE NUMBER CATV/DVDTV/VCR CH/SKIP TIPS ON IDENTIFYING YOUR VCR: If your VCR model does not have the CHANNEL UP function on its remote control, it cannot be identified using the SEARC
Operation of Remote Control (Continued) DVD/VCR POWER POWER DVD VCR TV TV POWER DISPLAY INPUT INPUT 1 2 3 4 5 6 7 8 DISPLAY REMOTE KEYPAD 9 ENTER FLASHBACK 0 100 PERSONAL PREFERENCE A B C D CH VOL — VOL + CH MENU MUTE CATV TV DVD VCR REW PLAY FF PAUSE STOP REC L HOW TO IDENTIFY A DVD The remote control may already be set to operate your DVD. Try this initial check before going on to the following “identify” section. (1) Slide CATV/DVD-TV/VCR switch to DVD.
Operation of Remote Control (Continued) L HOW TO IDENTIFY A CABLE CONVERTER L To Identify Your Cable Converter –Direct Entry Method. Use the following steps and list to quickly find the remote control code for your cable TV converter. • First look up your converter’s remote code number before going through the direct code entry steps below. • If this procedure does not identify your converter, use the Search method for identification. (1) Slide CATV /DVD-TV/VCR switch to CATV.
Before Calling for Service PROBLEM QUICK SERVICE CHECK LIST No Playback of VCR and Disc Player No Picture or Sound from External Video/Audio Products Remote Control Doesn’t Work Bars on Screen Picture Distorted Picture Rolls Vertically No Color Poor Reception on Some Channels Weak Picture Lines or Streaks in Picture Ghosts in Picture Picture Blurred Sound OK, Picture Poor Picture OK, Sound Poor No Picture or Sound Dark and Blank Picture External Electrical Noise Interfering with TV’s Operation Color on P
Antes de llamar al servicio de reparaciones PROBLEMA LISTA DE COMPROBACIONES DE SERVICIO RAPIDO POSIBLE SOLUCIÓN Pruebe con otro canal y si todo está bien, el problema puede ser de la emisora. Está conectado el televisor? Llega electricidad al tomacorrientes? Está conectado el interruptor del televisor? Está conectado la antena al terminal del panel posterior del televisor? Si utiliza una antena exterior, cerciórese de que el cable no esté dañado. Compruebe si hay interferencia local.
Specifications MODEL 27R-FS1 Receiving System NTSC Stereo Broadcast MTS/SAP Reception Channels AIR VHF 2-13 ch UHF 14-69 ch CATV 1-125 ch Channel Tuning 181-channel Reception PLL tuning system Antenna Input Impedance VHF/UHF 75 ohm Unbalanced Screen Size 27˝ Diagonally Measured Terminals Audio/Video input x 3 (Front x 1, Rear x 2) S-Video input x 2 (Front x 1, Rear x 1) COMPONENT-IN x 1 Audio output x 1 (Rear) Sound Output 5.
Limited Warranty CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 Printed in China TINS-0081SEZZ 01P06-CCP 56 54-56[Bk] 27R-FS1.
