Setup Manual

5
E
ENGLISH
3. Pull out the stand from the monitor. 4. Install the provided stand mounting part covers to the
holes where the stand was attached to.
Install the covers so that their tabs are on the right side.
tab
Stand mounting part cove
r
1
2
n
Installing the stand
Assemble in the opposite order of the removal.
MOUNTING PRECAUTIONS
Specications
Model 8M-B32C1
Power requirement AC 100 V - 240 V, 2.9 A, 50/60 Hz
Operating temperature
*
41°F to 95°F (5°C to 35°C)
Operating humidity 20% to 80% (no condensation)
Power consumption (Maximum) 260 W
Dimensions (excluding protrusions) inch (mm)
With the stand
Approx. 29-9/16 (W) x 10-1/4 (D) x 21-1/4 (H) (751 x 260 x 540)
Without the stand
Approx. 29-9/16 (W) x 3-7/8 (D) x 18-7/16 (H) (751 x 99 x 469)
Weight lbs. (kg)
Approx. 29.4 (13.3) (monitor only)
Approx. 42.4 (19.2) (with the stand attached)
* Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such
cases, please check the temperature condition specied by the optional equipments.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement without prior
notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from these values in individual units.