Operation Manual

ENGLISH

DISPLAY

FULL

POWER

SWING

CLEAN

FAN

MODE

SET/C

Press the TIMER ON ( ) button.

The TIMER ON indicator will blink; press the TIME

ADVANCE or REVERSE buttons to set the de-

sired time. (The time can be set in 10-minute

increments.)

Point the remote control at the signal receiver

window on the unit and press the TIMER SET

(SET/C) button.

• The orange TIMER lamp (

) on the unit will

light.

• The unit will generate a beep when it receives

the signal.

Select the operation condition.

• The unit will turn on prior to the set time to allow

the room to reach the desired temperature by

the programmed time. (Awaking function)

Example:

To stop operation at 11:00 p.m. and resume opera-

tion (With the same mode and temperature settings)

to bring the room temperature to the desired level by

7:00 a.m.

Set the TIMER OFF to 11:00 p.m. during opera-

tion.

Set the TIMER ON to 7:00 a.m.

The arrow (

or ) between the TIMER ON

indicator and the TIMER OFF indicator shows which

timer will activate first.

E-15

NOTES:

• You cannot programme the ON-TIMER and OFF-TIMER to operate the unit at

different temperatures or other settings.

• Either timer can be programmed to activate prior the other.

You can use the ON and OFF timers in combination.

COMBINED USE OF ON AND OFF TIMERS

TIMER ON