Service manual

5 – 3

b) Remove the tube cover.

 Insert the (–) screwdriver to A hole and then lean it to the

right as lifting B part.

c) Remove the evaporator from the cabinet.

 Take off the catch of the tube cover from the plate and move

the evaporator upward.

14) Lift the bottom part of the side cover R and remove the side

cover R..

15) Loosen the screw of cross flow fan and separate the cross flow

and the fan motor.

When assembling them, insert the motor shaft in the boss of the

cross flow fan to the ring position.

16) Take off the catch of guide R from cabinet and remove the guide.

17) Remove the plasmacluster holder from the cover while taking off

the both sides catches of the cover. (For the models with plasma-

cluster).

18) Take out the plasmacluster unit from the holder after taking off the

catch of it. (For the models with plasmacluster)

19)

For the models with the auto horizontal adjustment function.

Remove the 2 screws and take out the louver motor V assemblies.

 Remove the louver motor cover after t

aking off the catches of it.

Catch

Screw

side cover R

catch part

Ring

side cover R

catch part

louver motor cover

louver motor base

fan

AY-ZP35PR