Owner`s manual

10
Snap Wall Panels (108) into place along the side of shed. Ensure
holes line up and then secure panels together with Screws (SS).
5
Assemble Left Wall and Back Corners
1.
3.
2.
Do Not Over-Tighten Screws
Fold Right Corner Panel (104). Snap into place and secure with
Screws (SS).
Second person
should apply
pressure on opposite
side of the wall for easy
insertion of screws.
5b
5a
Hardware Bags:
1001632
Screwdriver
SS (20)
Place Wood Block (BC) directly under
the tab you are inserting. Snap tabs
into place one at a time.
Place Wood
Block (BC)
directly under
the tab you are
inserting. Snap tabs
into place one at a
time.
104
NOTE: The Window Wall Panel (125) may be inserted into any side Wall
Panel position; however, you should place one Window Wall Panel off-
center. You will then have enough wall space for your shelving. See page
11.