Owner`s manual

13
6
Assemble Right Wall and Last Corner
Assemble the right wall as you did the left wall by snapping Wall
Panels (108) into place along the side of shed. Window Wall
Panel (125) may be inserted into any side Wall Panel position. Ensure
holes line up and then secure panels together with Screws (SS).
Do Not Over-
Tighten Screws
Second person
should apply
pressure on opposite
side of the wall for easy
insertion of Screws.
6a
Hardware Bags:
1001632
Screwdriver
SS (20)
Place Wood Block (BC)
directly under the tab you
are inserting. Snap tabs into
place one at a time.
NOTE: The Window Wall Panel (125) may be inserted into any side Wall
Panel position; however, you should place one Window Wall Panel off-
center. You will then have enough wall space for your shelving. See page
14.