Owner`s manual

SAFETY INSTRUCTIONS

Most injuries are caused by misuse and/or not following instructions. Use

caution when using this shed.

To ensure safety, do not attempt to assemble this shed without following the instructions carefully. Check entire box and

inside all packing material for parts and/or additional instruction material. Before beginning assembly, read the instructions

and identify parts using the hardware identiﬁ er and parts list in this document. Proper and complete assembly, use and

supervision are essential for proper orientation and to reduce the risk of accident or injury.

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE AND WILL VOID

WARRANTY.

• Do not use or store hot objects such as grills, blowtorches, welding equipment, etc. in the shed.

• If using a ladder during assembly, use extreme caution.

• Two capable adults are required for shed assembly. (It is also recommended that a third adult function as an

instruction reader.)

Surface must be leveled before installation. We recommend building a level work space with a cement or patio style

surface. If the surface is not properly leveled, the Outdoor Shed will not assemble correctly. Proper surface leveling will

save you time in the long run, so please do not ignore this step.

Level Surface Notice:

Consult all local building codes, as well as city and county ordinances, to ensure that the construction of the Outdoor

Shed does not require a building permit. Proper building permit documentation may be required in your neighborhood,

and it would be unfortunate to learn this after constructing the Shed.

Building Code Notice:

There is a 1/2” phillips head screwdriver bit included with the shed hardware. This bit can be used with any power

screwdriver or drill. The plastic pieces of your shed can be damaged by overtightening of screws. To avoid damage we

strongly recommend the use of a low-powered power screwdriver or a drill that has an adjustable clutch that is set on a

low torque setting. If neither is available, use a hand screwdriver. In any case, use caution to avoid overtightening the

screws.

Screwdriver Notice:

Sharp objects may damage your ﬂ oor. If resting sharp, heavy objects on your shed ﬂ oor, place a block of wood between

the sharp object and ﬂ oor.

Floor Puncture Notice:

Congratulations on your Lifetime

Outdoor Shed purchase. By following the instructions below, your new Lifetime shed

should provide you with years of service and enjoyment.

Cleaning and Care

The polyethylene walls and shelves are stain- and solvent resistant. To clean, use a mild soap and a soft-bristled brush. Abrasive

cleaning materials may scratch the plastic and are not recommended. Repair scratches or rust spots on the metal by sanding

the affected area lightly; using a rust preventative spray primer; and ﬁ nally, spraying with a high-gloss spray enamel paint. Avoid

placing a direct heat source on or near surfaces unless using a heat barrier.

MODEL #6404

Sentinel

8’ x 10’ Outdoor Shed

INSTRUCTION #1018238 8/28/2006

You could win $200!

1. You automatically will be entered to win $200 in our monthly drawing!

2. In the unlikely event of a product recall or safety modiﬁ cation, we can notify you immediately and directly.

3. You may choose to receive Preferred Customer Announcements and promotions regarding new Lifetime

products.