Owner`s manual

23
9
Front Gable Assembly
Insert End Plugs (GB) into ends of Gable Support Square Tube
(AH). Attach Gable Support Square Tube to Front Gable (111),
and secure with Screws (GA).
Install Vent (VA) and Screen (VB) into the Front Gable, using Screws
(PB) and Washers (VC).
9a
Hardware Bags:
HH12100
Screwdriver
GA (12)
9b
Hardware Bags:
HH11900
Screwdriver
PB (10)
VC (10)
Second person should apply
pressure on opposite side of
the Gable for easy insertion of
screws.
The Square Tube must be
oriented with the fl at rectangle
hole up, and the fl at oval holes
facing away from the gable.
Only use a hand
screwdriver on this step
GB
AH
GA
VA
VB
VC
PB
Repeat steps 9a and 9b for the second Gable.
9c