Owner`s manual

Use Truss Connector (TA) to attach Roof Truss Channels at top. Secure with Screws (TC) and Cap

Nuts (HK). Before completely tightening, lay assembly on its side to ensure Channels and Brace are

parallel. Completely tighten all hardware.

Assemble Truss

Attach Brace (AC) to two Roof Truss Channels (AD)

(one on each side of Brace). Secure Brace with

Screws (TC) and Cap Nuts (HK).

11a

Use L-key (TD) to hold

screw (TC) in place

while tightening nut

(HK).

Ensure Truss

Connector is aligned

with the Truss

Channels.

Follow picture above

to connect Brace to a

Truss Channel at each

end of the Brace.

11b

TD (1)

HK (20)

Hardware Bags: 1015232

5/16” Wrench (1)

TC (20)

The nut goes on

the outside of the

truss.