Owner`s manual

27
Slide a Threaded Rod (SA) through the Truss Support
Brace and the top of the Truss Connector.
11c
HL (6)
3/8” Wrench (1)
11d
Secure the top and bottom of the Threaded Rod with a 1/4” Cap Nut (HL).
SA
SA (3)
Hardware Bags:
1001884
HL
HL
Repeat Steps 11a - 11d for each Truss.
11e
WARNING
Do not overtighten the Cap Nut. If the end of
the Bolt breaks through the plastic cap, call our
Customer Service Department at the number
on Page One. Exposed threads on the end of
the Bolt may cause serious injuries.