Owner`s manual
29
The Roof Support fi ts into
the notches in the Roof
Panel (as shown).
Secure the Roof Panel to the Front Gable and Truss Channel
with all but the very top Screws (SS).
12c
Hardware Bags:
1001632
Screwdriver
SS (4)
Hardware Bags:
1001632
Screwdriver
SS (7)
AI (1)
(not actual size)
Use a fl ashlight to check
that holes line-up before
inserting screws.
Only use a hand
screwdriver on this step
A second person
on a ladder should
apply downward
pressure while attaching
roof parts.
Roof Panel Ridge
Bottom lip of Roof Panel fi ts over wall panel and ridge fi ts into
the top of the wall. Secure the Roof Panel along the bottom
edge with Screws (SS).
12d
Ensure the ridge in the
bottom of the Roof Panel
fi ts into the top of the wall.
Roof Panel
Wall
AI
Slide the metal Roof Support (AI) into place
between the Roof Panel and Gable/Truss.
Insert top Screws (SS).