Owner`s manual

35
13
Skylight Installation
Pre-fold Skylights (AJ) before installing.
Push folded Skylight up through opening; open Skylight; use
tabs to pull Skylight down into place.
Fasten Skylight in place with Washer (LB) and Screws (LA) (pull
on tabs while inserting Screw to provide resistance).
HH11600
#2 Screwdriver (1)
LA (24)
LB (24)
13c
13b
13a
Only use a hand
screwdriver on this step
Repeat for all Skylights.
LA
LB
Pegboard Installation
14
Using a Level, position the 16” Pegboard Strip (AK) in the
desired locations. Screw the Pegboard to the wall using
#10 x 3/4” Screws (PB). See Note.
14a
Hardware Bags: 1011398
Screwdriver, Level
PB (10)
PB
The Pegboard Strips are
screwed directly into the
plastic. Line up Strip anywhere
on wall so the holes are over plastic
(and not over a groove in the wall).
Be sure that the Pegboard Strip is level
before inserting screws.
Repeat step 14a for second Pegboard Strip.
14b