Start Guide GB, DE, FR, ES, PL, RO

EN4
A6 A7
SUPPLIES
When ordering supplies, please use the correct part numbers as listed below.
Be sure to use only genuine SHARP parts and supplies.
Supply list
Supply Part number Usable life
Toner cartridge AL-103TD Approx. 2,000 sheets*
Drum cartridge AL-103DR Approx. 8,000 sheets
* Based on copying onto A4 or letter size paper at 6% toned area (The life of the Toner cartridge
which has been included in the unit at the factory is approximately 1,000 sheets.)
Storage of supplies
Proper storage
1. Store the supplies in a location that is:
clean and dry,
at a stable temperature,
not exposed to direct sunlight.
2. Store paper in the wrapper and lying at.
3. Paper stored in packages standing up or out of the wrapper may curl or become damp, result-
ing in paper misfeeds.
Storing toner cartridges
Store a new toner cartridge box horizontally with the top side up. Do not store a toner cartridge
standing on end. If stored standing on end, the toner may not distribute well even after shaking
the cartridge vigorously, and will remain inside the cartridge without owing out.
Supply of spare parts and consumables
The supply of spare parts for repair of the machine is guaranteed for at least 7 years following
the termination of production. Spare parts are those parts of the machine which may break down
within the scope of the ordinary use of the product, whereas those parts which normally exceed
the life of the product are not to be considered as spare parts. Consumables too, are available
for 7 years following the termination of production.
Trademark Acknowledgements
The following trademarks and registered trademarks are used in conjunction with the machine and its
peripheral devices and accessories.
• Microsoft
®
, Windows
®
, Windows
®
2000, Windows
®
XP, Windows
®
Vista, and Windows
®
7 are registered
trademarks or trademarks of Microsoft Corporation in the U.S.A. and other countries.
IBM, PC/AT, and Power PC are trademarks of International Business Machines Corporation.
All other trademarks and copyrights are the property of their respective owners.
A4 A5
Printing functions
Continuous print speed*
1
Max. 10 ppm
Print resolution
600dpi × 600dpi
Printer driver type
Host-based
Supported operating system
Windows 2000, Windows XP*
2
, Windows Vista*
2
, Windows 7*
2
Connector
USB 2.0 (high-speed)
RAM
32MB
*1 Print speed during printing of the second sheet and following sheets when using A4 plain paper and performing continuous one-sided
printing of the same page.
*2 Includes the 64-bit operating system.
Scanning functions
Type
Flatbed scanner SCAN to USB
Scanning mode
CIS (contact image sensor)
Light source
Light-emitting diode (LED)
Resolution
50dpi/72dpi/100dpi/144dpi
150dpi/200dpi/300dpi/600dpi
300dpi × 300dpi
Valid scanning area
216.7mm × 297.0mm
Scan speed
Multicolor 600dpi: 10.4mm/sec.
Grayscale 600dpi: 10.4mm/sec.
Multicolor 300dpi: 35.5mm/sec.
Grayscale 300dpi: 35.5mm/sec.
26.4mm/sec.
Scan color
Black and white
8-bit grayscale
24-bit multicolor
Protocol
TWAIN
Connector
USB 2.0 (high-speed)
The power switch positions of the copying machine are marked with “I” and “O” instead of “ON” and “OFF”.
“I” stands for “ON”, and “O” stands for “OFF”.
INFORMATION ON DISPOSAL FOR
USERS (PRIVATE HOUSEHOLDS)
Attention:
Your product is marked with this symbol. It means that used electrical
and electronic products should not be mixed with general household
waste. There is a separate collection system for these products.
A. Information on Disposal for Users (private households)
1. In the European Union
Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!
Used electrical and electronic equipment must be treated separately and in accordance
with legislation that requires proper treatment, recovery and recycling of used electrical and
electronic equipment.
Following the implementation by member states, private households within the EU states
may return their used electrical and electronic equipment to designated collection facilities
free of charge*. In some countries* your local retailer may also take back your old product
free of charge if you purchase a similar new one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or accumulators, please dispose
of these separately beforehand according to local requirements.
By disposing of this product correctly you will help ensure that the waste undergoes the
necessary treatment, recovery and recycling and thus prevent potential negative effects on
the environment and human health which could otherwise arise due to inappropriate waste
handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the cor-
rect method of disposal.
For Switzerland: Used electrical or electronic equipment can be returned free of charge to
the dealer, even if you don’t purchase a new product. Further collection facilities are listed on
the homepage of www.swico.ch or www.sens.ch.
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you want to discard it: Please contact your
SHARP dealer who will inform you about the take-back of the product. You might be charged
for the costs arising from take-back and recycling. Small products (and small amounts) might
be taken back by your local collection facilities.
For Spain: Please contact the established collection system or your local authority for take-
back of your used products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for the
correct method of disposal.
GENUINE SUPPLIES
For best copying results, be sure to use only SHARP products.
Only genuine SHARP consumables carry the Genuine Supplies label.
SHARP ELECTRONICS (Europe) GmbH
Sonninstraße 3, D-20097 Hamburg
Note
Do not make copies of anything which is prohibited from copying by law. The following items are normally prohibited from
copying by national law. Other items may be prohibited by local law.
Money Stamps Bonds Stocks Bank drafts
Checks Passports Driver’s licenses
Shielded interface cables must be used with this equipment to maintain compliance with EMC regulations.
SPECIFICATIONS
Machine specifi cations
Name
Digital Multifunctional System
Photosensitive type
OPC drum
Copy mode
Laser electrostatic method
Developing method
Dry-mono toner no magnetic
Fusing method
Heat roller
Original size/type
Maximum: single sheet of A4 paper, bound documents
Copy size
Maximum: A4; Minimum: A6
Lost margin
Front edge: 1 to 4mm, back edge: 4mm or less
Left edge/right edge: 4 ± 2mm, total 8mm or less
Grayscale
Level 2
Copy ratio
Fixed preset ratio: 50%, 70%, 100% and 141%
Continuous copy
1-9 copies
Copy speed
Equivalent to 10 copies/min.
Warm-up time
Approx. 13.5 seconds (at room temperature of 77°F (25°C) at rated
voltage)
First copy time
11.9 seconds or less (First copy time may vary depending on the status
of the machine.)
Power supply
Local voltage ±10% ( For the power supply requirement, please refer to
the nameplate at the bottom of the machine)
Power consumption
660W
Size
422mm (width) × 291mm (depth) × 130mm (height) (tray retracted)
Weight
About 6.6 kg (excluding the toner cartridge)
Occupied space
422mm (width) × 617mm (depth)(tray expanded)
Ambient environment
10°C to 35°C (20% to 60% relative humidity)
10°C to 30°C (85% relative humidity)
Acoustic noise emission (measurement according to ISO7779)
Sound power level L
wAd
Printing mode (continuous printing) 6.5 B
Standby mode 3.4 B
Sound pressure level L
pAm
(actual measurement)
Copy mode Bystander position 50 dB
Standby mode Bystander position 35 dB
Emission density (measured according to RAL-UZ122: Edition Jun.2006)
Measured chemicals Condition of copier Colour mode Diffusion speed
Ozone
When copier is in
operation
Black and white 1.5 mg/h or less
Dust Black and white 4.0 mg/h or less
Styrene Black and white 1.0 mg/h or less
Benzene Black and white 0.05 mg/h under
TVOC Black and white 10 mg/h or less
AL-1035_A_en_a4.indd 4AL-1035_A_en_a4.indd 4 2011-9-21 9:15:132011-9-21 9:15:13