Operating instructions
Direct Button Operation
Audio
status
SURROUND
Sleep Timer
Allows
you
to
capture
and
freeze a
moving
image
that
you
are
watching.
Press
FREEZE.
• A moving image
is
captured.
• Press FREEZE again to cancel the function.
11m
• When this function
is
not available, "No displaying still
image available." will display. .
• The still image automatically goes out after 30 minutes.
•
If
you are using the freeze function and a broadcast
activates the V-CHIP BLOCK, the freeze function will be
canceled and a V-CHIP BLOCK message will appear.
Allows
you
to
set a
time
when
the
TV
automatically
switches
to
standby.
Press
SLEEP.
•
The
remaining
time
displays
when
the
sleep
timer
has
been
set.
•
Each
time you press SLEEP, the remaining time switches
as
shown below.
Off - 30 - 60 - 90 - 120
t ,
To
view
external
source
images,
select
the
input
source
using
INPUT on the remote control unit
or
on
the TV.
1 Press INPUT.
• A list of selectable sources appears.
2 Press INPUT again
or
press
J;../T
to
select
the
input
source.
•
An
image from the selected source automatically displays.
• Each time INPUT
is
pressed, the input source toggles.
•
If
the
corresponding
input
is
not
plugged
in,
you
cannot
change
the
input.
Be
sure
to
connect
the
equipment
beforehand.
11m
• See pages 11, 12, 13, 14 and 35 for external equipment
connection.
INPUT
FREEZE
FLASHBACK
The
surround
function
produces
Surround
effect
from
the
speakers.
Each
time
you
press
SURROUND,
the
mode
changes
between
On
and
Off.
On: Makes
it
possible to enjoy natural, realistic surround
sound.
Off: Outputs the normal sound.
11m
. b h .
"S
d"
• You can have the same settings y c ooslng urroun
on the menu items.
(See
page 24.)
Press
FLASHBACK
to
switch
to
the
previously
tuned
channel.
• Press
FLASHBACK
again to switch back to the currently
tuned channel.
11m
•
FLASHBACK
will not work
if
no channel has been
changed after the
TV
is
turned on.
• When set, the time automatically starts counting down.
•
If
you want to adjust the sleep timer, you can press SLEEP
twice then change the time setting.
• When
it
is
5 minutes before the time expires, the remaining
time will start to keep appearing every minute.
11m
• Select "Off" by pressing SLEEP to cancel the sleep timer.
•
The
TV
will
enter
standby
when
the
remaining
time
reaches
O.
RfC
STOP
OPTION
FAVORITE
00
0
SlEEP
AUDIO
A,VMQ{\E
CC
EJ
CD
SUAAO'JNO
Cil
I EXIT
e-----')
RETURN
·o~o
i-FAVORITE
CH
-
0®@@
FREEZE
MENU
I 0
c:::::I:::::>
0
8<E08
El
ED
•
'
..
INPUT
FLASHBACK
Changing Channels
11m
• See page 29 for details
on
the Output Select function.
Mutes
the
current
sound
output.
Press
MUTE.
•
"[~"
will be displayed
on
the screen for 30 minutes, and
the sound
is
silenced.
MUTE
11m
• Within 30 minutes of pressing MUTE, mute can be
canceled by pressing
VOL
+/ - or MUTE.
• Mute will be canceled after 30 minutes have passed.
However, the
TV
will not suddenly output a loud sound
as
the volume
level
is
set to 0 automatically.
You
can
change
the
volume
by
pressing
VOL+/
-
on
the
TV
or
on
the
remote
control
unit.
• To increase the volume, press
VOL+.
• To decrease the volume, press
VOL-.
Changing Volume
You
can
change
channels
by
pressing
CH/VV
or
0-9,
•
(DOT).
Examples:
To select a 1 or 2-digit channel number (e.g., Channel
5):
Press 5
~
ENT.
To select a 3-digit channel number (e.g., Channel 115):
Press 1
~
1
~
5~
ENT.
To select a 4-digit channel number (e.g., Channel 22.1):
Press 2
~
2
~
•
(DOn
~
1
~ENT.
11m
• When selecting a 1-digit channel number,
it
is
not
necessary to press 0 before the number.
• When you enter 0-9 only, channel selection will be made
if
there
is
no operation within a few seconds.
•
If
you push "0" by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter 0-9 and •
(DOT),
channel selection will be
made
if
there
is
no operation within a few seconds.
@-
16