Operating instructions
On-Screen Display Menu
EZSetup
Setup
Menu
.
1 Press
MENU
to display the MENU screen, and then
press
~/~
to select "Setup".
2 Press
..
.t'l/f
to select a specific adjustment item,
and then press ENTER.
• When you select "EZ Setup", "CH Setup", "Parental
CTRL" or "Reset", you can enter the 4-digit secret
number here. See page 26 for setting a secret number.
3 Press J;./T (or
~/~)
to select the desired setting,
and then press ENTER.
4 Press
MENU
to exit.
You can run
EZ
Setup again, even after setting up the
preset channels.
Language:
Select from among 3 languages (English,
French and Spanish).
TV
Location:
Select "Home" or "Store" for the location
where you plan to install the
TV.
This product qualifies
for ENERGY STAR V3.0
in
Home mode default setting.
Home:
"Power Saving"
is
set
to
"Advanced", and
AV
MODE
is
set to "STANDARD".
Store:
"Power Saving"
is
set to "Off" and AV MODE
is
set to
"DYNAMIC (Fixed)". Picture Reset and Feature Demo can be
set.
Picture
Reset:
AV
MODE will be set to "DYNAMIC (Fixed)"
regardless of whether Picture Reset
is
"On"
or
"Off".
If
you
select "On", AV MODE will be reset to "DYNAMIC (Fixed)"
if
there
is
no operation for 30 minutes. When "Off"
is
selected,
AV
MODE will be set to "DYNAMIC (Fixed)".
Feature
Demo:
When "On"
is
selected, after
all
the settings
are completed, the Feature Demo screen
is
displayed if
there
is
no operation for several minutes.
• ENERGY STAR qualification
is
based on
AV
MODE
"STANDARD".
Air/Cable:
Make sure what kind of connection is made
with your
TV when selecting "Air" or "Cable".
CH
Search:
Channel auto search makes the TV look for
all
channels viewable
in
the set area.
rmm
• See "Initial Setup" on page 15 for setting each item.
• if no channel
is
found, confirm the type of connection
made
with
your
TV
and
try
"EZ
Setup"
again.
•
If
you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted,
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display. Press
J;.I'I/f
I
~/~
to select the new name for the input
mode.
rmm
• You cannot change labels
if
the INPUT SOURCE
is
TV.
Input Label
This setting allows you to skip the HDMI or PC-IN Input
("Input 4
(PC)",
"Input 5 (HDMI)", "Input 6 (HDMI)",
"Input 7 (HDMI)" and "Input 8 (HDMI)") on the Input
Selection operation.
Yes: Skips the input.
No:
Does not skip input.
Input Skip
rmm
• See "initial Setup" on page 15 for setting each item.
•
If
no
channel
is
found, confirm the type
of
connection
made with your
TV and try channel search again.
•
If
you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
CH Setup
If
initial setup does not memorize
all
the channels
in
your region, follow the instructions below to manually
memorize the channels.
Air/Cable:
Make sure what kind of connection
is
made
with your
TV
when selecting "Air" or "Cable".
CH
Search:
Channel auto search makes the
TV
look for
all
channels viewable
in
the set area.
CH
Memory:
You can select the channels to skip
in
each
ANALOG
(Air),
ANALOG (Cable), DIGITAL
(Air)
and
DIGITAL (Cable).
On:
Skips channels. (Channel selection disabled using
CH
IVY·)
Off:
Does not skip channels. (Channel selection enabled using
CHAfY·)
Remove
Scrambled
CH: This function makes the
TV
look for and then delete digital cable channels that
are scrambled and so unavailable
in
the set area. The
process may take more than 20 minutes.
Yes: Starts to remove scrambled channels.
No: This function does not work.
In
order to receive digital air broadcasts, you need
a digital broadcast antenna. You can confirm the
antenna configuration through the "Antenna Setup-
DIGITAL" screen.
If
necessary, adjust the direction of
the antenna to obtain the maximum signal strength.
Signal
Strength:
The signal strength of DIGITAL channel
is displayed. The signal information is based on the
current channel.
Channel
Strength:
Input the 2-digit channel number
to check the signal strength of the selected channel.
Make sure the signal
is
strong enough for each
channel.
• This function
is
available for DIGITAL
(Air)
only.
Antenna Setup-DIGITAL
AQuas
EXIT
~RETURN
O~Q
- FAVORITE CH -
0®@@
FnEEZE
MENU
O~~
@~m
{J
v~
,eH
POWER
H'''''
SAVING
" MUTE
@ - 0
[Englishj
EZ Setup
CH Setup
Antenna Setup-DIGITAL
Input
Skip
Parental CTRL
Position
Language
Reset
Example
""
Setup
@)-25