Operating instructions

On-Screen Display Menu
Position
For adjusting a picture's horizontal and vertical
position.
H-Pos.: Centers the image by moving it to the left or
right.
V-Pos.: Centers the image by moving it up or down.
miD
• For resetting adjustments to the factory preset values,
press
J;./T to select "Reset", and then press ENTER.
• When connecting a PC to the HDMI terminal, the image
position will be automatically adjusted.
It cannot be
manually adjusted.
• The screen position variable ranges depend on the View
Mode
or the signal type. The ranges can be seen on the
position-setting screen.
• Adjustments are stored separately according to input
source.
Language
You can also select a language from the Setup menu.
Select from among 3 languages: English, French and
Spanish.
Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
1 "Return to the factory preset values" displays on the
screen.
• If you have already set the Secret No., input the 4-digit
secret number here.
2 Select "Yes".
• "Now, TV will restart automatically. OK?" displays on the
screen.
3 Select "Yes".
• "Now initializing ... " displays on the screen and blinks.
After the reset has been completed, the power shuts off
and then comes back on. The screen will have returned
to its original settings.
miD
• The Channel Setup settings will not be changed.
• The Language settings will not be changed.
• The Secret number settings will not be changed.
• The TV Location settings will not be changed.
@- 26
Parental CTRL
(Parental Control Setting)
Allows you to use a secret number to protect certain
settings from being accidentally changed.
IMPORTANT:
Three conditions must be met to enable the V-Chip (see
pages 27 to 28):
1. Secret No. is registered.
2. V-ChipN-Chip (DTV Only) settings have been made.
• The "V-Chip (DTV Only)" will only be selectable when a new
rating system can be downloaded via digital broadcasting
in the
US.
3. "Status" is set to "On".
• New Secret No.
You can set and change the secret number by using
0-9.
Input Secret No.: When you change the secret number,
enter the old 4-digit secret number here. The cursor
moves to "New Secret No.".
New Secret No.: When you set the new secret number,
enter the new 4-digit secret number here. The cursor
moves to "Reconfirm".
Reconfirm: Enter the same 4-digit number you set in
"New Secret No.".
• Secret No. Clear
You can clear your secret number.
Yes: Your secret number is cleared.
No: Your secret number is not cleared.
• As a precautionary measure, make a note of your secret
number and keep
it in a familiar place.
• If the secret number is cleared, the Status setting
automatically sets to "Off". "V-Chip" and "Status" will not
be selectable from the menu.
·Stda¥.' ~a~~;;"
Used to enable or disable the parental control function.
This function will not be selectable from the menu if
you do not first configure your secret number.
On: Enables Parental CTRL.
Off: Disables Parental CTRL.