Operating instructions

Using AQUOS LINK
Controlling HOMI Equipment Using AQUaS LINK
What's AQUaS LINK?
• Using the HOMI CEC (Consumer Electronics Control) protocol, with AQUaS LINK you can interactively operate
compatible system equipment (Blu-ray disc equipment, AVamplifier,
OVO) .
• By connecting
AQUaS LINK-compatible devices with HOMI-certified cables to the 1V, you can control a
recorder or
AV amplifier using the remote control of the 1V .
• AQUaS LINK allows you to operate the HOMI-connected equipment with one remote control.
Example*
* You can use the INPUT 5,
6, 7 or 8 terminal.
HDMI-certified cable
(commercially available)
{
AQUOS SO Player
HDMI-certified cable
~r--...;;I =;;;.I_...,,~: ~m~c;,," ""'b~ ~
LJ U Optical fiber cable I
AQUOS LINK-compatible (commercially available)
Audio system
~I
TV
• Point the remote control toward the TV, not to connected HOMI equipment.
• Video noise may occur depending on the type
of HOMI cable used. Make sure to use an HOMI-certified cable.
• Up to 3 pieces of HOMI recording equipment and one
AV amplifier can be connected using this system.
• These operations affect the HOMI equipment selected as the current input source. If the equipment does not operate, turn on
the equipment and select the appropriate input source using
INPUT.
INPUT FLASHBACK
eo
You can operate AQUaS LINK-compatible devices with the remote control
unit when the
FUNCTION of the remote control unit is set to 1V.
REC STOP
and OPTION buttons will function only when AQUaS LINK is
used.
• One Touch Play
While the 1V is in standby mode, it automatically turns on and plays back the
image from the
HOMI source.
'
VOL IJC~
POWER
SAVING MUTE
@ v 0
FREEZE MENU
o ._
,-,
E. q pRiRN
- FAVORITE CH -
••••
REC STOP OPTION FAVORITE
•• 0
SLEEP AUDIO AV MODE cc
0000
SURROUND
o
• One Touch Recording
Press REC while you are viewing a broadcast received with the AQUaS
LINK-compatible recorder. The AQUaS LINK automatically recognizes the
connected HOMI device and starts recording.
• Single remote control
The AQUaS LINK automatically recognizes the connected HOMI device and
you can control the
1V and the devices as if using a universal remote control.
• Control the AQUaS LINK-compatible audio system
Set the volume of AQUaS LINK-compatible audio system.
1m
• The above description is an example of the AQUaS LINK function.
• The steps
in "AQUaS LINK Setup" on page 36 need to be completed beforehand.
• Refer to this operation manual and the operation manual of the
AQUaS LINK device to be used with this TV.
@- 35