Operating instructions
Using a PC
1 Press
MENU
to display the MENU screen, and then
press
~/~
to select the Setup or Option menu.
• For adjusting "Auto Sync," or "Fine Sync,", select the
Setup menu.
• For setting "PC Audio Select", select the Option menu.
2 Press
~/~
to select a specific adjustment item,
and then press
ENTER
to set each item,
3 Press
Ji../~
(or
~/~)
to select or adjust the desired
setting, and then press
ENTER.
Adjusting the PC Image
Auto Sync.
(for Analog PC Input
Mode
Only)
For automatically adjusting the
PC
image.
Yes: Auto Sync, starts and "Now adjusting the image,"
displays,
No: This function does not work,
ram
• When "Auto Sync."
is
successful, "Completed" displays,
If
not, "Auto Sync." failed,
• "Auto Sync," may fail even
if
"Completed" displays,
• "Auto Sync." may
fail
if the computer image has low
resolution, has unclear (black) edges, or
is
moved while
executing "Auto Sync,".
• Be sure to connect the PC to the
1V
and switch
it
on before
starting "Auto Sync,".
Fine Sync.
Ordinarily you can easily adjust the picture as necessary
to change image position using "Auto Sync.",
In
some
cases, however, manual adjustment
is
needed to
optimize the image.
H-Pos.: Centers the image by moving
it
to the left or
right.
V-Pos.: Centers the image by moving
it
up or down.
Clock: Adjust when the image flickers with vertical
stripes,
Phase: Adjust when characters have low contrast or
when the image flickers.
ram
• For resetting
all
"Fine Sync," adjustment items to the factory
preset values, press
Jit./T
to select "Reset", and then press
ENTER.
•
It
is not necessary to adjust the "Clock" or "Phase" when a
digital signal
is
being input, so
it
cannot be selected,
• The default cursor position may not be
in
the center,
because the screen position variable ranges may be
asymmetrical.
• The screen position variable ranges depend on the View
Mode or the signal type, The ranges can be seen on the
position-setting screen,
(@-
40
Setting Audio Input
PC Audio Select
Determines whether the AUDIO terminal
is
used for
INPUT 4 (PC-IN) or INPUT 6 (HDMI).
Input 4 (PC): Select this item when the audio signal
is
input via the INPUT 4 (PC-IN) terminal using
an
analog
RGB cable,
Input 6 (HOMI): Select this item when the audio signal
is
input via the INPUT 6 (HDMI) terminal using
an
HDMI-
DVI
conversion cable,
ram
• When "PC Audio Select"
is
set to "Input 6 (HDMI)", sound
will not be produced
if
you use only
an
HDMI-certified
cable to connect HDMI-compatible equipment. To produce
sound, you should make
an
analog audio connection,
•
If
you want to connect HDMI-compatible equipment using
only
an
HDMI-certified cable, set "PC Audio Select" to
"Input 4 (PC)",
PC Compatibility Chart
It
is
necessary to set the
PC
correctly
to
display XGA
and WXGA signal.
Resolution
Horizontal Vertical VESA
Frequency Frequency Standard
720 x 400
31,5 kHz 70 Hz
--
VGA
31,5 kHz
60
Hz
0
640 x
480
37.9 kHz
72 Hz
0
37.5 kHz
75 Hz
0
35,1 kHz
56
Hz 0
SVGA
800 x 600
37,9 kHz
60 Hz
0
48.1 kHz 72 Hz
0
46.9 kHz 75 Hz
0
48.4 kHz 60 Hz 0
XGA
1024x768
56,5 kHz 70 Hz
0
60,0 kHz
75 Hz
0
WXGA
1360 x 768 47.7 kHz 60 Hz
0
SXGA 1280 x 1024
64,0 kHz 60 Hz
0
SXGA+
1400 x 1050
65,3 kHz
60 Hz
0
UXGA
1600
x 1200
75,0 kHz
60
Hz
0
VGA and XGA are registered trademarks
of
International
Business Machines Corp.