Operating instructions
Preparation
Antennas
To enjoy a clearer picture, use
an
outdoor antenna. The following
is
a brief explanation of the types of connections
that are used for a coaxial cable.
If
your outdoor antenna uses a 75-ohm coaxial cable with
an
F-type connector,
plug
it
into the antenna terminal at the rear of the
1V
set.
300-ohm twin-lead cable
(flat)
IF-type
connector
----m
75-ohm coaxial cable (round)
1.A
75-ohm system
is
generally a round cable with F-type connector
that can easily
be
attached to a terminal without tools (Commercially
available).
2.
A 300-ohm system
is
a flat "twin-lead" cable that can be attached
to a 75-ohm terminal through a 300/75-ohm adapter (Commercially
available).
4BD
F-type connector should be finger-tightened only.
When connecting the
RF
cable to the
1V
set, do not tighten F-type
connector with tools.
If
tools
are
used,
it
may cause damage to your
1V
set.
(The
breaking
of internal circuit, etc.)
vj
~
F.-type
connector
~A~~\
75-ohm coaxial cable
A.NTICABlE
300-ohm
twin-lead cable
75-ohm
coaxial
cable
(round)
Coaxial
cable
(commercially available)
Home
Antenna
75.ohm
coaxial
cable
(round)
terminal
(75-ohm)
1"".,;,";""'';';';''-'''';'''''''';''---[!iIiO:-===\\==<J
Coaxial cable
(commercially available)
I
or
I
300/75-ohm
adapter
(c
ommercially available)
300-ohm twin-lead cable (flat)
\::=============
ftl
3OG-ohm twin-lead cable I
~:mbiner
OOT~-"'------+_
0
~=========~
(commercially available)
lor 75.ohm coaxial cable
~=~~~~~~===1Jt}
To
TV
antenna
terminal
VHF
UHF
ANTENNA ANTENNA
® Separate VHF/UHF
antenna
Connecting Antenna Cable
• Connect the antenna cable to the TV using one of the methods
in
the illustration as shown
(CD.
(g),
@ or
@)).
Home
Antenna
terminal (75-ohm)
....;;;C;;;;ab;;;;le..;,TV;.;I;;;;ea;;;,d-
..
ln
~
Do===\\==<J
(g)
VHF/UHF antenna
@ Combination VHF/
UHF antenna
CD
Cable without a CATV
converter
Installing Batteries
in
the Remote Control Unit
If
the remote control fails to operate
1V
functions, replace the batteries
in
the remote control unit.
1 Open the battery cover. 2 Insert
two
"AAA" size batteries 3 Close the battery cover.
(supplied with the product).
• Place the batteries with their terminals
corresponding to the (
+) and (- )
indications
in
the battery compartment.
E!iB
Improper use of batteries can result
in
chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage
in
old batteries.
• Remove batteries
as
soon
as
they are worn out. Chemicals that leak from batteries that come
in
contact with skin can cause a
rash.
If
you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter
life
expectancy due to storage conditions.
•
If
you
will
not be using the remote control unit for
an
extended period of time, remove batteries from
it.
@-8