User Manual

Changing the Lens
When changing the lens, use the supplied lens cover stick.
Info
• Before changing the lens turn off the power to the projector and remove the power cord
from the wall outlet.
• Do not attempt to change the lens while the projector is mounted on the ceiling.
1 Pull out the carrying handle.
2 Use the tip of the supplied lens cover stick
to push down on the groove on top of the
upper half of lens cover while pulling for-
ward to remove it with your hand.
Lens fastener
catch tab
Lock release
strap
Procedure for loosening the stiff
lens fastener ring
3 To remove the bottom half of the lens cover,
pull it down and towards you.
4 To remove the lens, hold it in one hand, to
keep it from dropping, while you turn the lens
fastener catch tab in the direction of the ar-
rows in the illustration with your other hand.
• If the lens fastener ring is stiff, attach the sup-
plied lock release strap to the catch tab on
the lens fastener ring and pull the strap to turn
it.
5 Remove the lens.
4
5
Lens fastener
catch tab
3
Lower half of
the lens cover
Carrying handle
1
2
Upper half of the
lens cover
-1