Specifications

K.S.F.
1. Check before operation
1-1 Before plugging, please make sure the voltage is right.
1-2
1-3
1-4
This is not damaged, it because the gear
in the gear box is engaged.
BEFORE RAISING, PLEASE MAKE SURE THE ATTACHED MANUAL HANDLE
IS NOT SET IN MANUAL SHAFT.
BEFORE RAISING, PLEASE MAKE SURE EMERGENCY STOP BUTTON IS
COMPLETELY PULLED UP AS SHOWN, IF NOT, THE MOTOR IS RUNNING BUT
THE MAST CAN NOT BE RAISING, JUST LIKE OPERATE IN MANUALLY.
IF EMERGENCY STOP BUTTON CAN NOT
BE PULLED UP, YOU MAY PRESS THE
TRIGGER OF THE SWITCH BOX SLIGHTLY
AS SOFT START WITH YOUR RIGHT HAND,
AND TWIST THE EMERGENCY STOP BUTTON A LITTLE BIT WITH YOUR LEFT
HAND AS SHOWN, THEN PULL IT UP.
YES!! RIGHT!!
EMERGENCY STOP BUTTON IS
COMPLETELY PULLED UP
2. Function Test
2-1 The function of Motor is normal or not.
2-2 The function of raising and lowering is normal or not.
2-3 If Feet is equipped with telescopic, ( MODEL CM-340H1,CM-520H1), test it is
normal or not.
～ ～15
7. Pre-operation Inspection