User Manual

10
Connecting the AC Adaptor
Take the following steps to connect AN-LS1’s AC adaptor.
1 Plug the AC adaptor’s DC plug into AN-LS1’s DC IN jack.
2 Plug the AC adaptor into wall outlet.
To wall outlet
• There is no on/off switch. AN-LS1 turns on as soon as the connected AC adaptor is plugged into
a wall outlet. The POWER LED indicator on AN-LS1’s top panel will light green to indicate that it
is receiving power.
CAUTION
• The AC adaptor may interfere with reception if used near a radio.
• Prevent flammables, liquids, and metal objects from entering the AC adaptor.
• The AC adaptor is a sealed unit. Do not attempt to open or modify it.
• Do not damage, drop, or subject the AC adaptor to vibration.
• Do not leave the AC adaptor in direct sunlight.
• Avoid using the AC adaptor in humid or extremely hot places.