User Manual

Setup

SETUP MENU Description

SETUP MENU (Main Menu)

S E T U P M E N U

[1]IP Address [2]Subnet Mask [3]Default Gateway

[4]User Name [5]Password

[6]RS-232C Baud Rate [7]Unit Name

[A]Advanced Setup [D]Disconnect All

[V]View All Setting [S]Save & Quit [Q]Quit Unchanged

setup>

[1] IP Address (Factory default setting : 192.168.150.2)

IP address settings. (

Page 18)

[2] Subnet Mask (Factory default setting : 255.255.255.0)

Subnet mask settings. (Page 18)

[3] Default Gateway (Factory default setting : Not Used)

Default gateway settings. (Page 18)

[4] User Name (Factory default setting : Not Required)

Setting of user name for security protection. (Page 19)

[5] Password (Factory default setting : Not Required)

Setting of password for security protection. (Page 19)

[6] RS-232C Baud Rate (Factory default setting : 9600 bps)

Baud rate settings for the RS-232C terminals. (Page 19)

[7] Unit Name (Factory default setting : AN-LS1)

It is possible to assign a unit name. (Page 20)

[A] Advanced Setup

Enters ADVANCED SETUP MENU. (Page 20)

[D] Disconnect All

Disconnect all connections. (Page 20)

[V] View All Setting

Displays all setting values. (Page 15)

Can also be used with advanced menu.

[S] Save & Quit

Save set values and quit menu. (Page 17)

[Q] Quit Unchanged

Quit menu without saving setting values. (Page 17)