SHARP AQUOS LC-50LE650U LIQUID CRYSTAL TELEVISION T#LI-VISEUR ACL mDOLSY .................... L_ DIGITAL 1-41|11"111 ..... PLUS IMPORTANT : Please read this operation IMPORTANT : Veuillez lire ce mode d'emploi avant de commencer IMPORTANTE : Lea este manual de operaci6n antes de comenzar .................................. manual before starting operating the equipment. & utiliser I'appareil. a operar el equipo.
LC-50LE650U LiQUiD CRYSTAL TELEViSiON ENGLISH OPERATION MANUAL J IMPORTANT: To aid reporting in case of loss or theft, please TV's model and serial numbers in the space numbers are located at the rear of the TV. IMPORTANT i WARNING: record the provided. The INFORMATION TO OF FIRETO ORRAIN ELECTRIC SHOCK, DO NOTREDUCE EXPOSETHE THISRISK PRODUCT OR MOISTURE.
iMPORTANT iNFORMATiON CAUTION: This product satisfies equipment. To prevent cables and connectors FCC regulations electromagnetic for connections. when shielded cables interference with electric and connectors are used to connect the appliances such as radios and televisions, unit to other use shielded DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-50LE650U This device complies with Part 15 of the FCC Rules.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. of trouble-free operation of your product, please read the important using this product. iMPORTANT 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) SAFETY iNSTRUCTiONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings.
iMPORTANT SAFETY iNSTRUCTiONS f ,, Outdoor Antenna Grounding -- If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
iMPORTANT SAFETY iNSTRUCTiONS f caring for the front panel -• Turn offwipe tile main power of and the AC cord fromcloth the wall outlet beforeetc.). handlhg. _ _o._ _ , Gently the surface theunplug front panel with a soft (cotton, flannel, To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage tile surface of the front panel. • Wiping with a hard cloth or using strong force may scratch the surface of the front panel.
Contents iMPORTANT iNFORMATiON ................... DEAR SHARP CUSTOMER ....................... iMPORTANT SAFETY iNSTRUCTiONS ........ 1-2 3 3-5 QUICK REFERENCE Attaching/Detaching the Stand ................. QUICK INSTALIATION TiPS ................... Using the Remote Control Unit ................. 7 8 8 Enjoying Photo/Music/Video Playback Connecting a USB Memory Device/ USB Hard Drive .............................. 35 Connecting a Home Network (DLNA) Server,,, 35 Select the Files to Play Back .........
Supplied Make sure the Accessories following Remote control (x 1) Page8 accessories unit are provided "AAA" size battery (x2) Page9 with the product. Stand unk (xl) Page7 Operation manual (xl) Connection (xl) guide ,, Always use the AC cord supplied with the TV. ,, The illustrations above are for explanation purposes and may vary slightly from the actual accessories.
QUICK REFERENCE 1 Attach your antenna to the back of the television. (See page 9.) 2 Connect outlet. the AC plug for the television into the AC Use the remote remote prevent remote control control proper control unit by pointing it towards the sensor on the ]V, Objects between the unit and the remote control sensor may operation. Remote control sensor ,'_ 7"-f -/ - Place the TV close to the AC outlet, and keep the power plug within reach. '..... /_\ \ / 1/ (b m) .,-.
Preparation To eqoy a clearer picture, use an outdoor antenna, The following is a bdd explanation of the types of connections that are used for a coaxial cable, if your outdoor antenna uses a 75--ohm coaxial cable with an F.
Part Names © i O ,Fro OPC* POWER * OPC: Optical Picture Control ( See page 25.) INPUT 5 USB terminals Im (COMPONENT/AV)_ i,.-mpuT5_ _._1 _ + i[ AUD,O PC, HD_, +®1 _ + terminal *2 Oh .....
Part Names 2 rv, STB, DVDoVCR, control (See pages 1 AUDIO: Switches registration mode, an appropriate button (STB, DISPLAY at the same time. External equipment external 2_ 4 3_ operation. 41 to 42 for details.) * To enter the code 3 the remote for TV, STB, DVD, BD, VCR and AUDIO you need to press DVDoVCR operational or AUDIO) buttons: and Operate the equipment. OPTION: Display the Link Operation button will function only when pages 43 to 46 for details.
Introduction to Connections An HDTV without an HD source is just an ordinary TV, To enjoy HD images on the TV, you should get HD programming . Over--the--air broadcasling via HD quaN-y antenna HD cable/satellite subscription HD compatible external equipment from the following: * For information on updating to HD programming, ask your cable/satellite service provider. Image quaN-y differs depending on the terminal used.
Connecting to External Equipment You can connect many types of external equipment to your TV, To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 12 and 20.) For connecting the TV to external equipment, use commercially available cables. ,, To protect equipment, always turn off the TV before connecting any external equipment. • Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Connecting toExternal Equipment [] When using Component cable (INPUT • Blu-ray disc player • DVD player • HD cable/satellite set-top box 5): Y (Green)_\_........_ J Component video cable AUDIO-R (Red)z,,,,,,,,,J .__1_ - To enjoy 1080p display capability, connect your external equipment using an HDMbcertified cable or a component cable and set the equipment to 1080p output. - See page 13 for connecting a Blu-ray disc player, DVD player or an HD cable/satellite set-top box to the HDMI terminal.
Connecting [] When to E×ternal using It is possible outputs Digital to output from Equipment coa×ial audio cable: through the DIGITAL AUDIO OUTPUT Depending on the connected In this case, Coaxial cable [] When (See page 27 for details.) set the audio digital audio using equipment, formats will be output audio PCM audio iiiiiiill iiii_ii!ii!i!i! !!!!iiiiiiiiii i Digital coaxial • terminal. the terminal.
Connecting to E×ternal Equipment Refer to page 48 for a list of PC signals compatible [] When using HDMI cable (iNPUT with the ]V, iiiii!iiiiii!iiiiiiiiiiiiiiiiiiiiiiiii! 1, 2, 3 or 4): ii/iiiiiiiliiiiiiiiiiiiiiili_!i HDMI-certified cane _ m !i ii iiiiiiiiiiiiii: - Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMbcertified cable to the INPUT 1, 2, 3 or 4 terminal, connect a G 3.
Watching • POWER TV 0 0 - "® Country - (On/Standby) POWER PowR CZ3_ STB DVD,VOR c_ czl AUDIO czl Press A/V to select the desired Country listed on the screen, and then press 0 0 0 0 DISPLAY SOURCE) [_ 2 m ENTER. o 0 6 8 OPTION SLEEP AUDIO FREEZE POWER Time Press POWER the power on the TV or on the remote control zone unit to turn 3 on. Press A/V to select the desired Time zone listed on the screen, and then press ENTER.
Watching TV Completed ® ENERGY STAR qualification is based on AV MODE "STANDARD(ENERGY STAR)". Air/Cable (Antenna setting) Make sure what kind of connection f_/when selecting "Air" or "Cable". 5 Press A/Y 8 After setting complete.the Completed. screen will show EZ setup is made with your to select "Air" or "Cable". Press ENTER to enter the setllng. If no channel is found, confirm the type of connection made with your TV and try "EZ Setup" again, (See page 29.
Direct Button Operation OPTION SLEEP AUDIO FREEZE Allows you to set a time when the TV automatically switches to standby. Press SLEEP, m@@ @@@ The remaining time displayswhen the sleep timer has been set. Each time you press SLEEP, the remaining time switches as shown below. Off _ 30.-_ 60.-_ 90 _. 120 t i Sma_ Centra] When set, the time automatically starts counting down. If you want to adjust the sleep timer, you can press SLEEP twice then change the time setting.
Direct Button Operation Press FLASHBACK to switch to the previously tuned channel. • Press FLASHBACK againto switch backtothe currently tuned channel. • FLASHBACK will not work if no channel has been changed after the TV is turned on. Allows you to capture and freeze a moving image that you are watching, Press FREEZE, • A moving image is captured. Press FREEZE again to cancel the function. When this function is not available, "No Function." will display.
Direct Button Operation AV MODE gives which vary can external Press • you due several viewing to factors to choose from brightness,type to best match of program the watched surrounding or the type environment of image input of the TM, from equipment, AV MODE, Current Press AV MODE Example: When AV again before the input MODE source STAR) ,--_MOVIE STAR) STAR): MOVIE: For a movie.
Direct Button Operation [] For 4:3 Example: programs Screen size images Normal S.Stretch (Smart Zoom stretch) Stretch o oo Sukable for viewing conventional 4:3 programs their normal format. [] For Sukable for stretching 4:3 programs to fill the screen. in Suitable for viewing widescreen 2.35:1 anamorphic DVDs in full screen. This mode is useful for 1.78:1 DVDs. When viewing 1.85:1 DVDs, stretch mode will still show very thin black bands at the top and bottom of the screen.
On=Screen Display Menu Example Example ® 1 Press 2 _1) Press MENU 4/_ to displaythe to select the _2) Press A/Y to select a specific screen, desired menu, adjustment item, (2) Item displayed • This indicates • Press ENTER in blue the item currently selected. to go to the adjustment screen for this item. (3) Item in brackets • This indicates the current display, (4) Item displayed • This indicates in white that the kern can be selected.
On=Screen • Some menu Display items Menu may not be displayed depending on the selected Picture Settings AV MODE (Changing Pic.Quality) ..... Page 25 OPC ................................................ Page 25 Backlight ......................................... Page 25 Contrast .......................................... Page 25 Brightness ....................................... Page 25 Color ............................................... Page 25 Tint ...............................................
On=Screen m - Display - Menu o • You can select AV MODE Adjusts the picture to your preference following picture settings, Example with the remote control settings. Automatically by pressing AV MODE unit. See page 21 for details adjusts the brightness on the of AV MODE of the screen, Off: The brightness is fixed at the value set in "Backlight". On: Automatically adjusts.
On=Screen Display Menu • "DI Film Mode" does not function depending on input signal type. The surround the speakers, On: Makes sound. "Auto" does not function when channel display shows an input signal resolution of 480p, 720p, or 1080p. "DI Film Mode" is not available during PC format input. Produces a clearer video function produces it possible Off: Outputs Surround to enjoy natural, the normal effect realistic from surround sound.
On=Screen - Display t, Menu , Allows you to capture and freeze a moving image that you are watching, Example • You can select Freeze by pressing FREEZE on the remote control unit. See page 20 for details of Freeze function.
On=Screen H-Pos.: Display Centers Menu the image by moving it to the left or right. V-Pos.: Centers the image by moving it up or down. Clock: Adjust when the image fi bkers wkh vertical stripes. Phase: Adjust when characters when the image fi bkers.
On=Screen Display • When you select Menu "individual Setup", you can enter the Air/Cable: 4-digk secret number here. See page 30 for setting a secret number. 3 Press A/V (or _/11_) to select the desired setting, and then press ENTER. 4 Press MENU Make sure what kind of connection is made wkh your TV when selecting "Air" or "Cable". ON Search: Channel auto search makes the TV look for all channels viewable in the set area.
On=Screen Display Menu ml MPAA (Voluntary movie rating system} Allows you to use a secret number to protect certain settings from being accidentally changed, New Secret No, : Enter a 4--digit Secret No, with the number buttons on the remote control to change you secret No,. Confirm Secret No. : Example Enter you new 4-digit Secret No, again to confirm, • As a precautionary measure, make a note of your secret number and keep it in a familiar place.
On=Screen Display Menu Press A/V to adjust the item to your desired position. "_" indicates the item is blocked. Press MENU to exit. E: Exempt: Example Includes news, sports, documentaries and other information programming; talk shows, music videos, and variety programming. 0: Children: Intended for younger children under the age of 8 years. Pays careful attention to themes that could threaten their sense of securRy and well-being.
On=Screen [] How Display to temporarily Menu release the V-CHIP BLOCK Central SmaEt When the V-CHIP BLOCK is working and censors a broadcast, "V-CHiP HAS BEEN ACTIVA]ED." displays. 1 Press ENTER while the V--CHIP is working, and then the secret number setting menu displays. 2 Input the 4--digit secret number by using 0-9. At this time V-CHiP BLOCK temporarily releases, [] Reactivating BLOCK the temporarily You can reactivate the temporarily BLOCK as shown below.
On=Screen Display Menu [] Updating the Software via the Network 1 Press A/V on the Manual Update screen to select "Network Update", and then press ENTER, • The TV connects to the network and checks for updates. • To cancel, press ENTER. • Do not unplug the AC cord while the software being updated. 4 When the software is successfully updated, a screen is displayed indicating that the update process is completed.
On=Screen 3 Display Menu Press ENTER to start checking memory device. the data in the USB • Do not remove the USB memory device or unplug the AC cord while the software is being updated, 6 When the software is successfully updated, a screen is displayed indicating that the update process is compWeted, Example 4 During the data checking, "Checking" blinks. - If the update has failed, check the file in the USB memory device and try Software Update again.
Enjoying Photo/Music/Video Playback You can connect the lV to a USB memory device, USB hard drive or home network (DLNA) server to enjoy viewing pictures, listening to music, and watching videos. • Depending on the USB memory recorded data. • It may take time to read the recorded data if the USB memory many files or folders. Use only alphanumeric characters for naming files.
Enjoying Photo/Music/Video Playback POWER DISPLAY
Enjoying Photo/Music/Video Playback Press MENU The photo selected onthethumbnail selection screen by pressing ENTER Example following to display tile sub-menu. You carl select tile options to display the photos • Play • Repeat • Shuffle • Rotate • Zoom • Show Info • The key guide display disappears automatically after a set time. To display the key guide display again, press DISPLAY. • Rotating photos only applies to the temporarily selected item and this setting is not saved.
Enjoying Photo/Music/Video Playback Example USB device USB Memory, Storage File system Photo file format for AiYi4i Video i_ ENTER RETURN/EXIT Menu Press MENU by the following • Sort (Mass USB hard drive FAT/FAT32 JPEG(.jpg .jpeg) Progressive BMP(.bmp) PNG(.png) Music file format Buttons USB card reader class), JPEG MP3 (.mp3) mode Select a desired XviD kern. iWhen selecting a folder icon: Enter this directory. .avi AVI .mkv MKV H.
Enjoying Photo/Music/Video Playback Press MENU following • to display the sub-menu. options You carl select tile to dispBy the photos Play • Repeat • Shuffle • Rotate • Zoom e Show Info • Rotating photos only applies to the temporarily item and this setting is not saved. The photos screen displayed Buttons for slide IRETURN/EXlT Example ,A.iYi4/i_ ENTER a desired kem. When selecting a folder icon: Enter this directory. When sebcting a photo thumbnail: Slide show.
Enjoying Photo/Music/Video Playback Example Buttons for playing RETURN/EXIT Example music Return to the thumbnail A(red) None/Repeat B(green) Play the music D(yellow) Display in random _/H/m DISPLAY Play/Pause/Stop. Display the information. Menu Sub Menu. Press MENU • • • • to display options screen. Buttons All. the sub-menu. You can select the to play the music. Video _ the actual the part you want to play _'_ / _ / _ Go to the previous/next Backward/Forward. _.
Other Viewing Options You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, DVD, BD, LD) using the presetting manufacturer function of your remote control unit. 1 1-1 To operate the connected equipment, press STB, DVD,VCR or AUDIO to select your device, (STB (cabldsatdlite set-top box), DVD, BD, VCR or AUDIO,) The remote control unit button will function as follows, • When you operate VCR, DVD or BD, press INPUT to select the terminal connected to your device.
Other Viewing Manufacturer Options codes VCB BRAND AUDIO DYNAMICS BROCKSONIC CANON CRAIG CURTIS MATHIS DBX EMERSON GE INSTANT REOLYA JC PENNEY JVC KENWOOD MAGNAVOX MAGNIN MEMOREX MONTGOMERY WARD NEC PANASONIC PENTAX PHILCO PHILIPS QUASAR REALISTIC SAMSUNG SHARP SONY SYLVANIA TATUNG TEAC TMK YAMAHA DVD/BD/LD DENON JVC KENWOOD MAGNAVOX MARANTZ MITSUBISHI PANASONIC PHILIPS PIONEER PROSCAN RCA SAMSUNG SHARP SONY TOSHIBA YAMAHA ZENITH BRAND REMOTE CONTROL CODE NUMBER O9 13 O4 12 O4 O9 10, 13, 14 O4 O4 O4 0
Using AQUOS LiNK What's AQUOS LINK? Using the HDMt CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD). By connecting AQUOS UNK compatible devices with HDMI--certified cables to the 'FV, you can control a recorder or AV amplifier using the remote control of the 'FV. AQUOS LINK allows you to operate the HDMt--connected equipment with one remote control. ius........
Using AQUOS LiNK This Example function can be set for each input terminal. On: The remote control unk of the TV can be used to select the channel, display program information, and perform other operations of a connected AQUOS LINK-compatible recorder, Off: This function does not work. This function audio which allows Requirements 1 Press MENU to display the MENU screen, and then press 4/1_ to select "System Options". 2 Press A/V to select "AQUOS then press ENTER.
Using AQUOS LiNK 0 Q= _ II = DISPLAY
Using AQUOS LiNK 2 This section explains how to play back a title in the AQUOS LINK--compatible equipment. 1 Power on the AQUOS and select appropriate 2 Press OPTION screen. 3 Press A/Y to select "Play from Rec. List", and then press ENTER. * The title list data from the connected AQUOS LINK-compatible equipment displays. 4 LINK-compatible external input. equipment, to display the Link Operation Select the title with A/Y/4/_-, to start playback.
Using a PC You can select the screen size. 1 Press VIEW 2 MODE, • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. Press VIEW MODE or A/Y while the View Mode menu is displayed to select a desired item on the menu. • You can sequentially • Connect select a View the PC before making Mode that has ks own aspect adjustments. (See page 16.) • Selectable screen size may vary with input signal type.
Using a PC For automatically adjusting the PC image. Yea: Auto Sync. start and "Auto adjusting No: This function does not work. This function audio. ..." displays. The adjustment source. Select • "Auto Sync." may fail if the computer image has low resolution, has unclear (black) edges, or is moved while executing "Auto Sync.".
Using a PC [] Command Command 4-digRs Command Parameter 4-digRs: 4-digits: [] Response Parameter Command. Parameter code code Input the parameter values, aligning left, and fill with blank(s) for the remainder. (Be sure that 4 values are input for the parameter,) When the input parameter is not within an adjustable range, "ERR" returns. (Refer to "Response code format".) Any numerical value can replace the "x" on the table. _ CR 4 digRs Return code The text of four characters.
Using the Internet By connecting your ]V to a broadband system, you can access the Internet from the 'FV, Display the latest Intemet information and access a range of useful information for AQUOS original home page*, You can enjoy a variety of streaming content and Internet applications, * About the original home page The original home page is a website set up specifically for AQUOS owners, The website is worth visiting as it provides a range of useful information, including and a frequently asked questions
Using the Internet [] Using the wireless LAN This 'FV is equipped with a wireless LAN function, For a wireless [..AN connection, you must use "Wireless Setup" to connect the access ^ point and ]V.
Using the Internet = = = @@@ @@@ @@@ @@ Q Example Smart Cent_aE US£ [] If you cannot connect to the Internet Perform the procedures below to check your qV's network settings, 1 Press EXIT to display the normal TV screen. 1 Press MENU to display the MENU screen, and then press 4/1_ to select "initial Setup". 2 Press A/T to select "lntemet press ENTER, 3 Press A/T to select "Network Setup",and then press ENTER if "interactive Service" is selected "YES".
Using the 1 Press press 2 Press press Internet MENU to display the MENU screen, and then 4/_ to select "initial Setup", A/T to select "lntemet Setup", and then ENTER, 3 Press A/T to select "Network ENTER if "interactive Service" 4 Press 4/1_ to select "Country" 5 Press _/1_ to select "US" Connect to the IM with the following settings IP on the PC.
Using the Internet Alphabet " • " ® _ " " 0®. O Press When you are editing an input screen or specifying the Ethemet settings used for accessing the Intemet, enter text from the software keyboard, • You can enter up to 128 characters 4/11_ alphabet, to select number • The selectable fype of characters entered; types depend on the input source. OK Applies the entered keyboard. Cancel for text. the or sign, information and closes Erases the character string.
Using the Internet e _ Oe *, e " . = = " These By connecting the TV to the variety of broadband content, music, photos, and Internet, you including can enjoy videos, a movies, games. applications available region. The delivery network Please check that the most current software is are provided applications speed speed. of applications Check details on application by content vary depending providers.
Using the Internet When you access the Intemet application for the first time, the following appears. • This message is available only in English.
Appendix • Installing the "iV requires special skill that should only be performed by qualified service Customers should not attempt to do the work themselves. SHARP bears no responsibility improper mounting or mounting that results in accident or injury. Wall mounting personnel. for the TV: 1 Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage the TV, 2 Remove the 4 screws from the mount holes. 3 Purchase a VESA compatible 14mm.
Appendix Problem Possible • No power • Check if you pressed • is the AC cord • Has the power • Unk cannot be operated. • External • Remote control unit does not operate. Solution on the remote control unit.
Appendix Problem Possible • No picture • is connection • Is the correct • If the Solution to other components correct? ,_ Page input selected? _ Pages 12 and 20 PC image is not displayed, check the following: - When connecting a laptop PC to the TV, check PC is set to external monitor. - Check the resolution Page • Picture qualky of HD programs poor.
Appendix CLEARING THE SECRET NUMBER If you forget the secret number, "1 Press MENU, 2 Select Initial Setup, 3 Prsee Individual Sefup 4. Press number 7071, 5 Press Secref No,, 6 Enter new password, • As a precautionary measure, clear the secret number using the following procedure, ,press "ENTER", make a note of your secret number Laboratories. Dolby above, and keep it in a safe place. Trademarks ® Manufactured Laboratories. ® "HDMI, the Licensing ® Products efficiency.
Specifications Item LCD LC-50LE650LI Size panel 50" Class ( 49 _/2 " Diagonal) Resolution 2,073,600 pixels (1,920 x 1,080) TV-standard (CCIR) American TV Standard ATSC/NTSC System TV Function Receiving Channel VHF/UHF VHF 2-13ch, UHF 14-69ch CATV 1-135ch (non-scrambled channel only) Digital Terrestrial Broadcast (8VSB) 2-69ch Digital cable *_ (64/256 QAM) Audio multiplex 1-135ch (non-scrambled channel only) BTSC System Audio out 10W x 2 Side Rear Terminals Bottom USB INPUT1 Photo/Mu
Specifications FCC This device compiles with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the par_ responsible for compliance could void the user's authority to operate the equipment.
Information on the Software License for This Product [] Software composition The software included in this product is comprised are held by SHARP or by third parties.
information on the Software License for This Product ImSoftware Copyrights XMLRPC--EPI Copyright 2000 @ Epinions, Inc. Iibjpeg This software is copyright @ 1991-1998, Thomas G, L.ane. Portions of this software are based in pad on the work of the Independent JPEG Group. OpenSSL Copyright @ 1998--2008 The OpenSSL Project. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (hllp://www.openssl.org) SSLeay Copyright @ 1995--1998 Eric Young (eay@cryptsoft.
Calling for Service For location of the nearest Sharp Authorized Service, customer assistance, please call 1-800--BE--SHARP.
® L|MITED Consumer WARRANTY Electronics Products Congratulations Sharp Electronics of Canada container warranty Product period, be free from defects or provide the first purchaser (a) Any This defects or distributed Jimited warranty caused as outlined (b) Any defects person sold ("Sharp") original Conditions: and Ltd.
® SHARP ELECTRONICS Sharp Plaza, Mahwah, SHARP CORPORATION New Jersey 07495-1163 CORPORATION Printed in Mexico Imprime au Mexique Impreso en M_xico 083-0001-2135 XX
