Operation Manual

36
ec40_e_08.fm
[36/38]
File management
Enable Bluetooth function in advance (nP. 24).
To register/connect a Bluetooth device, the Bluetooth passkey may need to be entered. Before starting the registration, decide the 1- to 16-digit number. Enter the
same number on the phone and the other party’s Bluetooth device.
1
In the home screen, [R]/[Settings]/[Wireless & networks]/[Bluetooth settings]
2
Select an item
 Bluetooth: Enable Bluetooth function.
 Device name: Change the phone’s name.
 Discoverable: Set whether to receive a search request from other Bluetooth devices.
 Detailed Bluetooth Settings: Set Bluetooth function.
 Scan for devices: Search for the Bluetooth devices around the phone and register them in it.
• Set the other party’s Bluetooth device to the registration stand-by status in advance.
/ When receiving registration request from Bluetooth device or connection request from unregistered Bluetooth device
1
Registration request/Connection request from Bluetooth device
2
[Pair]
: Enter the Bluetooth passkey if necessary.
Insert a microSD Card in advance.
/ Sending data
Example: Picture
1
In the home screen, [R]/[Contents Manager]
2
Tap and hold a picture/[Share]/[Bluetooth]
: Set the receiving Bluetooth device to receive data.
3
Select a Bluetooth device to connect to
/ Receiving data
1
Send data from the sender’s Bluetooth device
2
Tap on the status bar/select data to receive/[Accept]
3
Tap on the status bar/select the received data
Bluetooth settings
You can connect more than two devices simultaneously. However, when hands-free (headset) and audio are connected with each other, you cannot hear the audio
sound during a hands-free call.
If you fail to connect, connection may become available after re-registration of Bluetooth devices.
[Bluetooth]
When the Bluetooth function is enabled, the phone is set to receive a registration request/connection request from other Bluetooth devices. Enable Discoverable in
advance to allow the phone to be searched for by other Bluetooth devices.
While in connection stand-by, even if a connection request from a Bluetooth device is received, connection may not be made depending on the signal strength etc.
[Discoverable]
Setting is disabled automatically when a certain period of time passed after enabling.
[Scan for devices]
For details on the operations of the other party’s Bluetooth device, refer to the manuals of the Bluetooth device to be used.
Sending and receiving by Bluetooth
Some data cannot be received all.
When available memory space in the save destination becomes insufficient, the data being received to that point are saved and receiving ends.
ec40_e.book 36 ページ ２０１１年９月１３日 火曜日 午後５時１１分