User manual
Table Of Contents
- AQUOS Xx2 mini User Guide
- Contents
- Introduction
- Getting Started
- Basic Operations
- Handset Interface
- Welcome Sheet (Lock Screen) Basics
- Home Screen (Feel Home) Basics
- Icons at Display Top (Status Bar)
- Checking Handset Status & Notifications (Notifications Window)
- Customizing Welcome Sheet (Lock Screen)
- Customizing Home Screen (Feel Home)
- Capturing Screenshots (Clip Now)
- Disabling Touch Operation Temporarily (Childlock)
- Copying Onscreen Text (Copy Anywhere)
- Writing Notes on Display (KAKU Notepad)
- Phone
- Messaging & Internet
- Camera
- Music & Images
- Connectivity
- Global Services
- Handset Settings
- For Assistance
- Safety Precautions
- Index
14
Charging by PC
Connect handset to a PC with Micro USB Cable (SHDDL1;
optional accessory).
・Make sure that PC is turned on.
・Charging may not be possible/take a long time depending on
connection and PC conditions.
・Never connect Micro USB plug while handset or Micro USB
Cable is wet.
Insert Micro USB plug of Micro USB Cable into External Device
Port
・Insert Micro USB plug in correct orientation; otherwise,
External Device Port may be damaged. Check contours and
orientation of Micro USB plug, then insert it with tabs (○)
facing down.
Insert USB plug of Micro USB Cable into PC USB port
Charging starts and Charging/Notification Lamp
illuminates.
・Charging/Notification Lamp goes out when charge is full.
After charging, remove Micro USB Cable from handset and PC
Power On/Off
Power On
Long Press until SHARP logo appears
Handset powers on, and Welcome sheet (lock screen)
appears after a while.
・If confirmation appears, follow onscreen prompts.
・An initial settings screen may appear the first time handset
is powered on. For details on initial settings, see "Handset
Initial Settings."
Drag or up
Feel Home appears.