User manual
Table Of Contents
- AQUOS Xx2 mini User Guide
- Contents
- Introduction
- Getting Started
- Basic Operations
- Handset Interface
- Welcome Sheet (Lock Screen) Basics
- Home Screen (Feel Home) Basics
- Icons at Display Top (Status Bar)
- Checking Handset Status & Notifications (Notifications Window)
- Customizing Welcome Sheet (Lock Screen)
- Customizing Home Screen (Feel Home)
- Capturing Screenshots (Clip Now)
- Disabling Touch Operation Temporarily (Childlock)
- Copying Onscreen Text (Copy Anywhere)
- Writing Notes on Display (KAKU Notepad)
- Phone
- Messaging & Internet
- Camera
- Music & Images
- Connectivity
- Global Services
- Handset Settings
- For Assistance
- Safety Precautions
- Index
179
Safety Precautions
AQUOS Xx2 mini
USIM/SD Card Insertion/Removal
Use notch to open Card Slot Cover
Insert/remove USIM/SD Card
・Insert USIM Card and SD Card into correct openings in
correct orientation.
・USIM Card Insertion/Removal
・Always power off before insertion/removal.
・Place USIM Card in USIM Tray beforehand.
・When removing USIM Tray, do not pull it forcefully or at
an angle; damage may result. Gently pull it out horizontally
from the edge.
・When inserting empty USIM Tray, do not insert it at an
angle; damage may result. Check orientation of USIM Tray,
then gently insert it all the way horizontally.
・SD Card Insertion/Removal
・Unmount SD Card beforehand.
・When removing SD Card, lightly push it in and release
finger (SD Card pops out slightly); gently pull it out
horizontally.
Close Card Slot Cover
・When closing Card Slot Cover, press ○ areas firmly and
make sure that there is no gap between Card Slot Cover and
handset.
Display (Touchscreen)
Handset Display is Touchscreen.
If Display is wet, wipe it with a soft cloth.
・Touchscreen may not respond in these situations:
・Use with gloves/long fingernails
・Use of pens, pencils or sharp objects
・Use with objects on/against Display
・Use while wet
・To prevent malfunctions, do not:
・Touch Display with wet fingers
・Use if Display is wet
・Subject Display to force/pressure
・Place a sticker or shield (commercially-available protective
film, privacy protector shield, etc.) on Display
・To improve response, calibrate Touchscreen as follows.
In app sheet, (Settings) About phone Adjust
touch panel Follow onscreen prompts
・
In the following cases, Press to turn off Display,
Press again to turn on Display and then operate
handset.
・Handset operates automatically without touch input
・Handset does not respond to touch input
TV Antenna Cable
To view or record One Seg, connect TV Antenna Cable to
Earphones-Microphone Port.
・Earphones with Mic (SHLDL1; optional accessory) can be
connected to use with TV Antenna Cable.
・Insert plug firmly. If plug is not inserted all the way,
broadcasts may not be received or audio may not be heard.
・As connection may be poor if Port is dirty, clean with a dry
cotton swab, etc. Avoid damaging Port when cleaning.
・Do not deform TV Antenna Cable plug or Earphones-
Microphone Port. Deforming may cause malfunction.
・Bringing earphone cord, etc. close to handset may result in
noise.
Earphones-Microphone
Earphones with Mic (SHLDL1) are available for separate
purchase. Other earphones-microphone may not function
properly on handset.
・Do not subject Earphones-Microphone Port to strong impact
while using earphones-microphone; water/dust resistance
may be affected.