AR-M200/M201 Operation-Manual Setup-Guide GB

19
SETUP IN A WINDOWS ENVIRONMENT
2
5
When the model selection window
appears, select the model name of
your machine and click the [Next]
button.
6
When the printer driver selection
window appears, select the printer
driver to be installed and click the
[Next] button.
Click the checkbox of the printer driver to be
installed so that a checkmark ( ) appears.
7
Select whether or not you wish the
printer to be your default printer and
click the [Next] button.
If you are installing multiple drivers, select the
printer driver to be used as the default printer.
If you do not wish to set one of the printer drivers
as the default printer, select [No].
8
When the printer name window
appears, click the [Next] button.
If you wish to change the printer name, enter the
desired name.
9
When you are asked if you wish to
install the display fonts, select an
answer and click the [Next] button.
• When the PC-Fax driver is being installed, this
screen does not appear. Go to the next step.
• If you are not installing the PCL printer driver
(you are installing the PS printer driver or the
PPD driver), select [No] and click the [Next]
button.
10
Follow the on-screen instructions.
Read the message in the window that appears and
click the [Next] button.
Installation begins.
11
When the installation completed
screen appears, click the [OK] button.
12
Click the [Close] button in the window
of step 1.
This completes the installation.
• After installation, see "CONFIGURING THE
PRINTER DRIVER FOR THE OPTIONS
INSTALLED ON THE MACHINE" (page 33) to
configure the printer driver settings.
• If you installed the PS printer driver or the PPD
driver, the PS display fonts can be installed from the
"PRINTER UTILITIES" CD-ROM that accompanies
the PS3 expansion kit. See "INSTALLING THE PS
DISPLAY FONTS" (page 21).
• When the PC-Fax driver is being installed,
this screen does not appear. Go to the
next step.
• The PS3 expansion kit is required to use
the PS printer driver or the PPD driver.
Note
• If you are using Windows Vista/Server
2008
If a security warning window appears, be
sure to click [Install this driver software
anyway].
• If you are using Windows
2000/XP/Server 2003
If a warning message regarding the
Windows logo test or digital signature
appears, be sure to click the [Continue
Anyway] or [Yes] button.
After the installation, a message prompting
you to restart your computer may appear. If
this message appears, click the [Yes] button
to restart your computer.
Note
Note