User guide
Wi-Fi
Turning Wi-Fi on and connecting to a wireless network
1. From the Home screen,
tap
Apps > Settings.
2. Tap
Wireless & networks > Wi-Fi settings.
3. Select the
Wi-Fi check box to turn Wi-Fi on.
4. The network names and security settings of detected Wi-Fi networks are displayed.
5. Tap a Wi-Fi network to connect.
ⰺ
If you selected a network that is secured, enter the security key and then tap Connect. Depending on the network type
and security settings, you may also need to enter more information or choose a security certicate.
Connecting to a Wi-Fi network with EAP-TLS security
You may need to install a network certicate to your phone before you can connect to a Wi-Fi network with EAP-TLS
authentication protocol.
1. Save the certicate le to the root folder of the microSD card.
2. From the Home screen,
tap
Apps > Settings.
3. Tap
Location & security > Install from SD card.
4. Select the network certicate needed to connect to the EAP-TLS network.
5. After the certicate is installed, follow the steps in the previous section to connect to the Wi-Fi network.
Checking wireless network status
1. From the Home screen,
tap
Apps > Settings.
2. Tap
Wireless & networks > Wi-Fi settings.
3. Tap the wireless network that the phone is currently connected to.
A message box is then displayed showing the Wi-Fi network name, status, speed, signal strength, and more.
Connecting to another Wi-Fi network
1. From the Home screen,
tap
Apps > Settings.
2. Tap
Wireless & networks > Wi-Fi settings.
3. Detected Wi-Fi networks are displayed in the Wi-Fi networks section. To manually scan for available Wi-Fi networks, on the
Wi-Fi settings screen, press
Menu > Scan.
4. Tap another Wi-Fi network to connect to it.
87