OPERATION MANUAL

23
E
Basic Operation
n
Switching the screen size
Even when the screen size is changed, the display may remain the same depending on the input signal.
16:9 Displays the image with an aspect ratio of 16:9 so it fills the entire screen.
Use with 16:9 signals such as 3840 × 2160, 1920 × 1080 or 1280 × 720.
4:3
Displays the image with an aspect ratio of 4:3.
Use with 4:3 signals such as 640 × 480, 800 × 600, or 1024 × 768.
When showing such as 16:9 video, the width of the image will be shrunk.
Zoom1 *
1
The image is slightly enlarged. The edges of the image are cut off.
Zoom2 *
1
The image is enlarged slightly more than Zoom1. The edges of the image are
cut off.
Dot by Dot *
1
*
2
Displays the dots of the input signals as the corresponding dots on the screen.
*1 Do not appear when the input mode is D-SUB.
*2 Do not appear when the input mode is AV/YPBPR.
TIPS
• Usingthismonitor’sscreen-sizeswitchingfunctiontocompressorexpandthescreenforcommercialorpublicviewingin
establishments like cafes or hotels may infringe on the rights of the creators, as protected by Copyright Law, so please be
careful.
• Theappearanceoftheoriginalvideomaychangeifyouselectascreensizewithadifferentaspectratiothantheoriginal
image (e.g. TV broadcast or video input from external equipment).
• Whenplayingcommercialsoftware,partsoftheimage(likesubtitles)maybecropped.Inthiscaseselecttheoptimalscreen
size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the
edges of the screen. This is due to the characteristics of the software, and is not a malfunction.
• Dependingontheoriginalvideosize,blackbandsmayremainattheedgesofthescreen.