OPERATION MANUAL
26
E
E-board / Note
n
Drawing
1. Select the sheet to be drawn on.
You can open a saved board, and load a background. (See page 25.)
Tool Function
Add a new sheet behind the currently displayed sheet.
Display the previous sheet.
Shows the current sheet number and the total number of sheets. Touch to show a list (thumbnails) of the
sheets on the right side of the screen. You can touch a thumbnail to go to that sheet. To delete that sheet,
touch
.
Display the next sheet.
2. Draw.
Select such as drawing tool to draw. You can perform the following operations.
Tool Function
Pen
Draw a line. When the Mark Pen is selected, you can draw a line like that of a mark pen. You can
change the settings (line width/color).
The drawn lines are handled in the software as an “object”.
You can touch with the flat part of your finger or palm of your hand to automatically change to an
eraser.
Mark Pen
Eraser
Erase a drawn line.
The object eraser deletes a touched object. To delete multiple objects, trace over the objects.
You can also delete all objects on a sheet being drawn.
Object eraser
line
You can draw a line, arrow, broken line, square, or oval.
You can change the thickness and color of a line, arrow, broken line, square or oval.
arrow
broken line
square
oval
Touch to select an object. To select multiple objects, trace over the objects.
You can move or enlarge/reduce the objects.
Undo the previous drawing or edit.
Redo an undone action.
3. Touch
-
to exit. (See page 25.)
TIPS
In E-board Mode menu, you can switch between single touch and multi-touch. (See page 35.)
The following operations can be performed in single touch mode.
• Dragtheobjectwithtwofingers-Movetheobject
• Zoom(seepage18)-Enlarge/reduce