OPERATION MANUAL

27
E
E-board / Note
Note
Touch or on the side of the screen, and touch in the menu that displays to start.
The board is shown as transparent.
Video input from the HDMI terminals/expansion slot cannot be saved.
Only 1 sheet.
• Thedrawnlinesandtheimagespastedontheboardarehandledinthesoftwareasan“object”.
• Youcanwrite/drawlettersandlinesontheimagedisplayedonthismonitor.
Used for drawing.
(See below.)
n
Drawing
1. Draw.
Select such as drawing tool to draw. You can perform the following operations.
Tool Function
Pen
Draw a line. When the Mark Pen is selected, you can draw a line like that of a mark pen. You can
change the settings (line width/color).
The drawn lines are handled in the software as an “object”.
You can touch with palm of your hand to automatically change to an eraser.
Mark Pen
Eraser
Erase a drawn line.
The object eraser deletes a touched object. To delete multiple objects, trace over the objects.
You can also delete all objects on a sheet being drawn.
Object eraser
Save a board that is being drawn as an image. The image will be saved in the Note folder. The
maximum size of a saved image is 1920 x 1080.
Exit the application.
2. Touch
to exit.
TIPS
• Whentheexternalinputisdisplayed,theboardcannotbesavedintheUSBflashdriveconnectedtothefrontUSBport.
Please insert a USB flash drive in the rear USB port.
If the USB flash drive can not be connected due to interference with the wireless adapter, save it in the internal memory. And
then copy it to the USB flash drive using File Explorer.